Dealer profile

ERDBUB - Helmut Hammes - Internationale Vermittlungen

Location:Germany, Karlsruhe
Contact person:Mr. Helmut Hammes
Contact phone:0721 - 3842339 + 0171 - 6018489
Contact fax:-
Languages:English, Russian, German, Mandarin, Spanish, Portuguese, Italian, French, Bengali

About us

Copy link

Send Request

For Sale Listings (84)

LEWIS, 2 HI 1 STAND, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: LEWIS
Model: 2 HI 1 STAND

2 HI 1 STAND LEWIS HOT ROLLING MILL YEAR: 1954 INCOMING SLAB SIZE: THICKNESS: 12" MAX. WID... 2 HI 1 STAND LEWIS HOT ROLLING MILL YEAR: 1954 INCOMING SLAB SIZE: THICKNESS: 12" MAX. WIDTH: 52" LENGTH: 126" PRODUCTION CAPACITY: 480,000lbs PER DAY (LIMITED BY PRE-HEAT) -EXIT STRIP THICKNESS: 0.250" MINIMUM -STRIP WIDTH: 61" INSIDE CLEARANCE ON TABLES -COIL SIZE: ID - 20" / OD - 60" / 20,000 LBS. -SEPARATING FORCE: 21" x 22" X 4 POSTS CONSISTING OF THE FOLLOWING: -SLAB PREHEAT FURNACES: 2 x SUNBEAM CAR TYPE 20 SLAB CAPACITY -ENTRY ROLL TABLES: 150 FEET -MILL: EDGE GUIDES, MECHANICAL SCREWDOWNS -MILL WORK ROLLS: 30.25" DIAMETER x 66" FACE 11 ROLLS, 2 SETS OF CHOCKS MORGOIL BEARINGS -MILL DRIVE: 2000 HP SYNCH REV. MOTOR 1:1 STRAIGHT DRIVE, 40/60 RPM, 600V, 2770 AMPS MAX. TORQUE 721,000 FT/LBS. AT 0-37.2 RPM -EXIT MILL TABLES: 300 FEET -EXIT SLAB CROP SHEAR -WATER QUENCH -RECOILER -COOLANT SYSTEM Includes Homogenizing furnace and a lot of spare parts PRICE....................: US$ 722,000 AS IS, WHERE IS

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:17
Location:Germany, Karlsruhe
Price:-
ID:AS4045

12 years ago Details

VORONEZH, 04.038.842, FORGING, PRESSES

Description:

Category: PRESSES
Type: FORGING
Manufacturer: VORONEZH
Model: 04.038.842

Hot-forging press VORONEZH 04.038.842 (1600t) new in 1979, without drive shaft. Maximum force ton-... Hot-forging press VORONEZH 04.038.842 (1600t) new in 1979, without drive shaft. Maximum force ton-force 1600 Slider stroke length mm 300 Slider strokes per minute 85 Maximum distance between table and slider (in lower position of slider) mm 660 Size of adjustment of distance between a table and slider mm 10 Size of a course of the top pusher mm 40 Size of a course of the bottom pusher mm 32 Table overall dimensions: mm - from left to right 1080 - from front to rear 1200 Slider overall dimensions: mm - from left to right 894 - from front to rear 944 The sizes of windows in racks: mm - height 710 - width 630 Main electric motor power kW 90 Press overall dimensions mm - length 4850 - width 3600 - height 5570 Press weight kg 119 600 Price: $129,000.00 FOB HOT FORGING Komatsu CAH 1600 The maximum force 1600tn Move the slider 280mm Closed height of 760 mm The size of the bottom surface of the slide 950x900 mm The number of strokes in the slide 25 min. The size of the upper surface of the slide 950x900 mm Electric Power. 75 kW motor. 380V Air pressure 5 kg/cm2 Weight of 106 tons of press Size 3225x3880x6196mm The maximum weight of the press frame 42 Tn. Price:$199,000.00 FOB

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:-
Location:Germany, Karlsruhe
Price:-
ID:AS4044

12 years ago Details

STANKO, 6650, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: STANKO
Model: 6650

Double-column Plano miller STANKO mod. 6650, 1981 YOM Technical specification: Table size, mm …………... Double-column Plano miller STANKO mod. 6650, 1981 YOM Technical specification: Table size, mm …………………………………………….. 20000 X 5000; Quantity of planning heads, pc: - vertical ……………………………………………………………….. 2; - horizontal ………………………………………………………....… 2; Machine weight, kg ………………………………………………. 750 000. Max. weight of workpiece, kg – 200 000 Max. dimensions of workpiece, mm – 5000 x 4000 x 20000 Price: USD 755,000.00 FCA Russia Double-column Plano miller STANKO mod. 6672 Technical specification: Table size, mm ……………………………………………... 8000 X 2500; Quantity of planning heads, pc: - vertical ……………………………………………………………….. 2; - horizontal ………………………………………………………....… 2; Machine weight, kg ………………………………………………. 169 000. Max. weight of workpiece, kg – 35 000 Max. dimensions of workpiece, mm – 2500 x 2500 x 8500 Price: USD 211,000.00 FCA Russia

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1981
Location:Germany, Karlsruhe
Price:-
ID:AS4043

12 years ago Details

DNEPROPRESS, PA 1343, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: DNEPROPRESS
Model: PA 1343

1) The complete technical specifications of both the press and the manipulator. Attached 2) The... 1) The complete technical specifications of both the press and the manipulator. Attached 2) The names of the original manufacturer and when they were new. Dnepropress plant, new in 1976 3) More photographs. Attached 4) Whether the equipment is in working condition and whether they can be inspected on power. Stop working in 2009. 5) The mains supply frequency of the country where the equipment is presently installed. 50Hz 6) The lowest possible price that the owner would accept on FOB nearest port of shipment basis, inclusive of a commission of 5% for my company Will discuss with solid customer in case of real purchasing. Hydraulic Hot Forging Open Die Press Dnepropress PA 1343, yom 1976 Nominal Force:2000t RAM Stroke:1600mm Distance between RAM and table:3150mm Pull out table:1600(W)x4000(L)mm Table travel:+/- 1600mm Speed:50-300 mm/sec Pump productivity:2250 L/min Dimension:17840(L)x12470(W)x13740(H)mm Height above floor:8900mm Weight:440t Equipped with two rail forging manipulator 5t & 10t capacity. Price:$ 2,222,000.00 FCA or best offer

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1976
Location:Germany, Karlsruhe
Price:-
ID:AS4042

12 years ago Details

CRAVEN, Head Adjustable Rail, VERTICAL TURRET, LATHES

Description:

Category: LATHES
Type: VERTICAL TURRET
Manufacturer: CRAVEN
Model: Head Adjustable Rail

Craven (3) Head Adjustable Rail Double Column VBM Diameter of (4) Jaw Chuck: 85"(2160mm) Maxim... Craven (3) Head Adjustable Rail Double Column VBM Diameter of (4) Jaw Chuck: 85"(2160mm) Maximum Swing: 90"(2286mm) Height Under Rail: 53"(1346mm) Height Under Tool: 44"(1118mm) Left Swiveling Ram Head Horizontal Travel:TBD Left Swiveling Ram Head Vertical Travel:TBD Right Swiveling Turret Head Horizontal Travel:TBD Right Swiveling Turret Head Vertical Travel:TBD Rail Vertical Adjustment: TBD Vertical Travel of Side Head: TBD Horizontal Travel of Side head: TBD Spindle Speeds: 1.6 - 30 rpm Main Motor Drive: 25 HP Feeds: .016 - .366 Equipped With: 85"(2134mm) 4 Jaw Chuck Swiveling Ram Head Swiveling (5) Position Turret Head Side Head with 4 Way Tool Post Pendant Control Power Elevating Rail Flush Floor Design, No Pit Required Under Power - video available Approximate Dimensions: 210"(LR) X 155"(FB) X 144"(H) Price $64,000.00 ExW

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:-
Location:Germany, Karlsruhe
Price:-
ID:AS4041

12 years ago Details

BULLARD, HIGH COLUMN CNC, VERTICAL TURRET, LATHES

Description:

Category: LATHES
Type: VERTICAL TURRET
Manufacturer: BULLARD
Model: HIGH COLUMN CNC

BULLARD HIGH COLUMN CNC VERTICAL TURNING & BORING MACHINE YEAR OF RETROFIT: 2008 CHUCK DIA... BULLARD HIGH COLUMN CNC VERTICAL TURNING & BORING MACHINE YEAR OF RETROFIT: 2008 CHUCK DIAMETER........................ 124"(3150mm) MAX. SWING............................ 140" (3556 mm) MAX. RAIL HEIGHT...................... 127" (3226 mm) RAM TRAVEL............................ 71" (1803 mm) RAM 8 1/2" X 8 1/2" SPINDLE SPEEDS (INFINITELY VARIABLE).. 1.7 - 66 RPM MAIN MOTOR............................ 100 HP MINIMUM HOLE FOR RAM.................. 12" CROSS RAIL TRAVEL..................... 69" (1753 mm) APPROX. OVERALL DIMENSIONS............ 23' WIDE x 25' DEEP x 328" HIGH EQUIPPED WITH: SIEMENS 802D CNC CONTROL 124" 4-JAW CHUCK (4) CHUCK JAWS CHIP CONVEYOR 16 POSITION CAROUSELL TYPE TOOLCHANGER COOLANT SYSTEM WITH GUARDING REMOTE MANUAL PULSE GENERATOR ALL AVAILABLE MANUALS COMPLIMENT OF TOOLING VIDEO IS AVAILABLE SPECIFICATIONS SUBJECT TO VERIFICATION PRICE: $735,000.00 ExW North America

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:-
Location:Germany, Karlsruhe
Price:-
ID:AS4040

12 years ago Details

FRITZ HECKERT, SZ22-12-06/30/1-10/1, SLIDEWAY, GRINDERS

Description:

Category: GRINDERS
Type: SLIDEWAY
Manufacturer: FRITZ HECKERT
Model: SZ22-12-06/30/1-10/1

Slide Way Grinder Fritz Heckert SZ22-12-06/30/1-10/1, yom 1984 Grinding width:2500 mm Working heig... Slide Way Grinder Fritz Heckert SZ22-12-06/30/1-10/1, yom 1984 Grinding width:2500 mm Working height:1250 mm Working length:6000 mm Distance between column:2680 mm Clamping surface of table:2240x6500 mm Max. work piece weight:60 ton Table speed (step less):1...40 meter/minute Cross beam speed:750 mm/minute Dimension:10200(W)x5780(H)x19500(L) mm Weight:150 ton Universal grinding spindle Type 10-45 digital Grinding wheel: -Peripheral grinding: 500x50x127 mm - face grinding: max 200 mm Spindle RPM: 500...2900 Rotation angle:+/-90 degree Vertical stroke:450 mm Drive power:10 kW, 1200 RPM Peripheral grinding ram Type USS 30/1 digital Power:30 kW Grinding wheel: max 630x405x305 mm Spindle RPM:960 Vertical stroke:250 mm Leveling device for Peripheral grinding ram -leveling stroke:320 mm -leveling speed:45...450 mm/minute Rotation:+/-60 degree Vertical adjustment:375 mm Grinding device for barrel-type surface -barrel shape:+/- 0.2 mm working speed: up to 45 meter/minute Angle grinding head Motor: 2.2/2.8 kW Motor RPM: 1500/3000 Grinding wheel diameter:140...250 mm Rotation:360 degree Horizontal stroke:30 mm Device for replacing of grinding wheel Max. diameter of grinding wheel:630 mm Height with grinding wheel:2300 mm Weight with grinding wheel:220 kg Weight:30 kg Price:$399,990.00 ExW

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1984
Location:Germany, Karlsruhe
Price:-
ID:AS4039

12 years ago Details

TOS, SK 25, VERTICAL TURRET, LATHES

Description:

Category: LATHES
Type: VERTICAL TURRET
Manufacturer: TOS
Model: SK 25

VTL TOS SK 25, new in 1964 Max. workpiece height 1600 mm Max. workpiece diameter 2500 mm Diameter... VTL TOS SK 25, new in 1964 Max. workpiece height 1600 mm Max. workpiece diameter 2500 mm Diameter of clamping plate 2400 mm Max. weight of workpiece - kg Main motor output 80 kW Dimensions l x w x h 10400x5050x6730 mm Machine weight 48000 kg Price:$66 000.00 ExW

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:8
Location:Germany, Karlsruhe
Price:-
ID:AS4038

12 years ago Details

ZFTK, 500, GEAR, CUTTERS

Description:

Category: CUTTERS
Type: GEAR
Manufacturer: ZFTK
Model: 500

Bevel Gear Generator ZFTK 500 Serial no 8340 Technical condition – very good – not used Wit...

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:-
Location:Germany, Karlsruhe
Price:-
ID:AS4037

12 years ago Details

RAVENSBURG, KVH4-1800 CNC, CNC LATHE, LATHES

Description:

Category: LATHES
Type: CNC LATHE
Manufacturer: RAVENSBURG
Model: KVH4-1800 CNC

RAVENSBURG, KVH4-1800 CNC , YOM 1995 *Technical Data (A production line of parts for windmills)... RAVENSBURG, KVH4-1800 CNC , YOM 1995 *Technical Data (A production line of parts for windmills) Multi-Function machine 1) Main Dimensions Turning diameter over bed cover 2300mm Turning diameter over carriage 1800mm Center height over floor 1650 (2300)mm Center height over bedways 1520mm Distance between centers 6000mm Min. Distance between centers 1000mm Admissible workpiece weight unsupported (s=300mm) 4500kg (9900 lb) between centers 16000kg (35200 lb) Weight of the machine 150000kg (330000 lb) Width of beds 1450mm Height of beds 670/750mm CNC system Siemens SINUMERIK 880T Operating voltage 460/60Hz Total capacity required (switch cabinet) 400kW (536 hp) for two chillers of main hydraulic units 2 x 19 kW (2 x 25.5 hp) for coolant unit 7 kW (9.4 hp) for deep hole drilling unit 52 kW (70 hp) 2) Headstock (left and right) with hydrostatic spindle hearings. Main spindle diameter at front bearing 500mm Spindle head acc. DIN 55 026, Type A size 28 4 spindle speeds 1-32min -1 (1-32 RPM) 2-69min -1 (2-69 RPM) 5-160min -1 (5-160 RPM) 11-350(300)min -1 (11-350{300} RPM) max. drive capacity (D.C motor) 118kW / 1250 min -1 (158 hp) max. torque at facepate (step 1) 60000 Nm (44300 ft lbf) Diameter of faceplate right 1100mm C-Axis with spindle brake with spindle brake Spindle speed 0.003 - 2.8 min -1 (0.003 - 2.8 RPM) Max. torque at faceplate 32000 Nm (7380 ft lbf) ROD 1750 Headstock slide (Q1/Q2 axes) Headstock traverse 2500mm Feed 1 - 3000mm/min (0.04 - 118 IPM) Slide clamping hydraulic 3) Support with hydrostatic quideways Carriage traverse (Z-axis) 7600 mm Cross slide traverse (X-axis) 1230 mm Feed speed (X/Z-axis) 1-8000 mm/min (0.04 - 315 IPM) 0.05 - 50 mm/U (0.002 - 2 IPR) Rapid traverse 8000mm/min (315 IPM) Thread pitches (X/Z-axes) 0.01 - 2000mm/U (0.0004 - 78.75 IPR) Feed power (X-axes) 55kN (12360 lbf) Feed power (Z-axes) 60kN (13500 lbf) Swivel feature round table (B-axis) 260' max. speed 2 min-1 Longitudinal measuring system Z-Axis LB 326.01 Longitudinal measuring system X-Axis LS 704 Longitudinal measuring system W1-Axis LS 704/LS 403 Longitudinal measuring system Y1-Axis LS 704 4) Sword turning unit (TURN 4a) with tool magazine Height of sword 350mm Width of sword 78mm Displacement of sword (W1-Axis) 400mm Feed speed of sword (W1-Axis) 1-5000mm/min (0.04 - 200 IPM) Rapid traverse 5000mm/min (200 IPM) Feed power W1-Axis 54kN 12000 lbf Tool holding fixture KM 63 Number of tool holding positions for inside operation 2 automatical changing Clamping tool and sword hydraulic Tool changer at pallet chain magazine Number of grippers 2 (for right and left side) Tool holding fixtures KM 63 Number of tool places 30 max. Diameter of tools 100mm max. length of tools 200mm max. weight of tools 10 kg (22lb) 5) Boring Bar Holder (BORE 2) Diameter of Boring Bar Hole 152.4mm Clamping manually 6) Milling uniy (MILL 3) Tool clamping automaticaly 2 Tool holding fixtures acc. DIN 2079 ISO SK 50 Tool clamping force 24kN (5400 lbf) Diameter of milling spindle (front bearing) 160mm 2 milling spindle speeds 7-720min -1 (7-720 RPM) 20 - 2000min -1 (20 - 2000 RPM) Drive capacity (A.C motor) 30kW / 1500 - 6500min-1 (40.2 hp) Gear shifting hydraulic Height adjustment vertical (Y1-Axis) downward +100mm / upward -350mm Feed speed (Y1 - Axis) 1-5000mm/min (0.04 - 200 IPM) Rapid traverse 5000mm/min (200 IPM) min. distance to steady I and II (in Z dir.) 200mm min. distance to steady III (in Z direction) 330mm Tool changer at pallet disc magazine Number of grippers 2 (for both spindle sides) Tool holding fixtures acc. DIN 207 ISO SK 50 Number of tool places 7) Outside grinding unit (GRIN 2b) with hydrodynamic bearing Diameter of grinding spindle 320mm Grinding wheel diameter 600 - 1270mm Width of grinding wheel 76.2mm Width of grinding wheel fixture 50.8mm Bore of grinding wheel 304.8mm max. spindle speed 1120min-1 (1120 RPM) Drive capacity (A.C motor) 30kW / 1500min - 1 (40.2 hp) 3-fold dressing unit with coolant 8) Quill grinding unit (GRIN 1a) Diameter of quill 200mm Displacement of quill (W1-Axis) 500mm Feed speed of quill (W1-Axis) 1-5000mm/min (0.04 - 200 IPM) Rapid traverse 5000mm/min (200 IPM) Feed power W1-Axis 54kN (12000 lbf) Clamping of quill hydraulic Grinding wheel diameter 250/320mm Width of grinding wheel 60m Bore of grinding wheel 76.2/127m Spindle speed 3600mm-1 Drive capacity (D.C motor) 20kW/2000min-1 (27hp) 9) Quill turning unit (TURN 5a) Diameter of quill 230mm Displacement of quill (W1-Axis) 400mm Feed speed of quill (W1-Axis) 1-5000mm/min (0.04 - 200 IPM) Rapid traverse 5000mm/min (200 IPM) Feed power W1-Axis 54kN (12000 lbf) Tool holding fixture KM 63 Number of tool holding positions for inside operation 2 automatical changing Number of tool holding positions for outside operation 2 manual changing Clamping tool and quill hydraulic Tool changer at pallet disc magazine Number of grippers 2 (for right and left side) Tool holding fixtures KM 63 Number of tool places 12 max. Diameter of tools 100mm max. length of tools 200mm max. weight of tools 10kg (22lb) 10) Steady rest bottom part (Q8-Axis) Displacement 6000mm Feed speed 1 - 3000mm/min (0.04 - 118 IPM) 11) Steady rest station Displacement of steady transport car 4600mm Feed speed 1 - 3000 mm/min (0.04 - 118 IPM) Number of steady places 3 12) 3-fold steady rest upper part Supporting diameter steady I 100 - 508mm Supporting diameter steady II 380 - 915mm Supporting diameter steady III 810 - 1350mm Weight capacity 60kN (13500 lb) Diameter supporting sleeves 140mm Diameter of rollers 125mm Width of rollers 65mm 13) Pallet Station Displacement of shuttle wagon (Q3-Axis) 8800mm Feed speed of shuttle wagon (Q3-Axis) 1 - 22000mm/min (0.04 - 866 IPM) Rapid traverse 22000mm/min (866 IPM) Number of pallet storage places 6 Feed speed of pallets (chain drive) 2200mm/min (86.6 IPM) Thermal stabilisation of lubricant for headstock and milling unit Recooling unit TMO/L 24.0 Cooling capacity 27.9 kW (37.4 hp) Pump capacity 160 l/min (42 gal/min) Chip conveyor Type 300 S-2 Width of belt 300mm Drive capacity 0.55 kW (0.75 hp) Coolant device Tank capacity 1300 Litre (344 gal) Pump capacity 100 l/min (26 gla/min) at 10 bar (145 psi) Paper wep filter PF 160/2000 with paper Type V360/1020 floating capacity 180 l/min 48 gal/min -- More informations from seller for potential buyer 23. 04. 2012 Thank you for asking. The price is 615,000 Euro (Ex-W). The machine is located in S. Korea. It is still under power now and be able to inspect, but it will be dismantle soon.

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1994
Location:Germany, Karlsruhe
Price:-
ID:AS4036

12 years ago Details

MITSUBISHI, GANTRY TYPE CNC, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: MITSUBISHI
Model: GANTRY TYPE CNC

USED GANTRY TYPE CNC MILLING MACHINE MAKER：MITSUBISHI MANUFACTURED：1991(FULL RETROFITT）... USED GANTRY TYPE CNC MILLING MACHINE MAKER：MITSUBISHI MANUFACTURED：1991(FULL RETROFITT） Specification Gate width: 6,000mm The width that can pass: 5,800mm (width of the artefact) The height that can pass: 3,550mm (high of the artefact) The travel of the bridge: 22,000mm A fraise head: 600 angles of mm( lamb types) Main shaft diameter: φ 200mm Main shaft number of revolutions: 5 - 400rpm A control unit: FANUC-15M ATC: 60 of them Angle head The use dollar to spin to grind There are a lot of various spindles Others, a lot of accessories

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1991
Location:Germany, Karlsruhe
Price:-
ID:AS4035

12 years ago Details

KOLOMNA, 1540, COPYING, LATHES

Description:

Category: LATHES
Type: COPYING
Manufacturer: KOLOMNA
Model: 1540

VTL Kolomna 1550, new in 1967, 1980 &1986 Max. diameter of work piece: 5000 mm Max. height o... VTL Kolomna 1550, new in 1967, 1980 &1986 Max. diameter of work piece: 5000 mm Max. height of work piece: 2500 mm Chuck diameter: 4500 mm Max. shift of vertical supports: 1600 mm Turn angle of vertical supports: -15 to +40 degrees Max weight of work piece: 63 tones Max. effort of cutting by two supports: 12500 kN Max. moment of cutting at chuck: 20 000 kNm Speed of chuck turning: 0.34 - 31.2 turn/minute Vertical and horizontal feed: 0.0435 - 352 mm/turn Main motor power: 125 kW Dimensions: Height - 8 400 mm Width - 11 400 mm Length - 6 600 mm Weight - 140 500 kg VTL Kolomna 1540, new in 1971 Excellent condition Faceplate dia: 4000 mm Max work piece size: diameter 4000 mm Height: 2000 mm Max work piece weight: 50 t Upper left support: -Maximum stroke: Horizontal: 2300 mm Vertical: 1250 mm, Max horizontal stroke: 2300 mm Max vertical stroke: 1250 mm, Strokes of the side support: -Horizontal 950 mm -Vertical 1820 mm, Faceplate speed range: 0,52-48,9 rpm (stepless) Range of work feeds of support on each axis: 0,059-470 mm/rev. (stepless) Stroke of the cross rail:1870mm Speed of cross rail: 430 mm/min Supply power: 380 V 50Hz Power of main drive DC electric motor: 63 kW Total installed power: 88,1 kW Overall dimensions: 5920x10145x5575 mm Machine weight: 100 000 kg

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1971
Location:Germany, Karlsruhe
Price:-
ID:AS4034

12 years ago Details

KRAMATORSK, 1A670, CENTER DRIVE, LATHES

Description:

Category: LATHES
Type: CENTER DRIVE
Manufacturer: KRAMATORSK
Model: 1A670

Heavy Duty Lathe Kramatorsk Mod.1A670, YOM 1970 Max. swing over bed 2 000 mm Distance between ce... Heavy Duty Lathe Kramatorsk Mod.1A670, YOM 1970 Max. swing over bed 2 000 mm Distance between centers 10 000 mm Max swing over slide 1600 mm Max. torque strength of spindle 190 000 kg/m Profile of cutter 80 x 80 mm Move of movable sleeve of rear mandrel 500 mm Max. weight of detail 63 000 kg Rotary speed of spindle 2,5-128 rpm line feed 0,2-19 rpm cross-feed 0,09-7,8 rpm Power of main motor 100 kW Dimensions of machine 18300 x 4300 x 2850 mm Weight of machine 108200 kg Heavy Duty Lathe Kramatorsk 1A665, new in 1970 Distance between centers:8000mm Max. work piece diameter above bed:1600mm Max. work piece diameter above support:1250mm Min. work piece diameter :320mm Max. work piece weight:40 t Number of bed:3 One tail stock Spindle RPM:1.26-160 Threading: -Metric:1-96 -Inch:20-3/8 Main Motor:75kW Dimension:14520(H)x2965(W)x2330(H)mm Weight:60t

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1970
Location:Germany, Karlsruhe
Price:-
ID:AS4033

12 years ago Details

MITSUBISHI, NPM-8, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: MITSUBISHI
Model: NPM-8

We are offering plano milling machine like the below, Mitsubishi Model: NPM-8 Year: 1991 6m X... We are offering plano milling machine like the below, Mitsubishi Model: NPM-8 Year: 1991 6m X 22m The distance between column: 6000 mm Working width: 5800 mm Working height: 3550 mm Working length: 22000 mm Miller head: 600 mm (ram type) Spindle diameter: 200 mm Spindle speed: 5-400 rpm Power(motor) : 60/15min DC75/90Kw(Japan Fuji, GGF522BC) Y-, Z- Travel control : FANUC 15-MA, 5,000mm/min Inspection is available.

View all description View short description

Seller name:
ERDBUB - Helmut Hammes - Internationale Vermittlungen

YOM:1991
Location:Germany, Karlsruhe
Price:-
ID:AS4032

12 years ago Details

Page 3 of 6

ERDBUB - Helmut Hammes - Internationale Vermittlungen

{{ title }}