TOP - state! DC for welding of steel and stainless and stick electrodes up to 3.25 mm. Cycle 35% 100% for an 180 Amp 120 Amp Power Supply: 230 V (50-60 Hz) Weight: only 7.8 kg The MinarcTig 180 is the perfect device for the everyday TIG welding with direct current. The device operates with a 1-phase voltage of 230 V and can be operated over a long cord or power generators. User-friendly access controls allow for quick and easy parameter determination. With the "Minilog" there is the possibility to switch during the welding process between two different power levels. during welding, the welder can work choose the higher or lower power level by simply pressing the torch trigger. This will make easy work, for example, if the width of the welding joint changes or other elected ine welding direction and the torch must be kept otherwise. Pulse welding is automated so that the user only needs to set the pulse interval and the average value of the welding current. Based on these settings, the machine konfiguiert the remaining welding parameters A shorter Impulsintgervall itself has a beneficial effect on the welding arc, so it can be more easily accomplished in a narrow welding joint. With a longer interval has better control of the welder [...Technical data truncated]
