C41 series Pneumatic Forging Hammer is mainly used in general forging works, for example hand tools blank forging, and Pneumatic Forging Hammer could forging steel ball especially.
Specifications:
Introduction of Pneumatic Forging Hammer:
Pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. It is also used for forging in bolster dies.
Our pneumatic forging hammer from 9kg to 75kg are widely used by blacksmith for the art forging,from 150kg to 2000kg are widely used in the industrial forging.
Features of Pneumatic Forging Hammer:
1. Unlike steam hammers or air hammers fed from a supplementary compressor, the Pneumatic forging hammer with its self-contained cylinder,require no ancillary power raising plant.
2. The Pneumatic forging hammer is equipped with a self-priming lubricating oil pump, during operating, it can realize the automatic lubrication.
Parameters of Pneumatic Forging Hammer:
Model: C41-150
Weight of falling parts (kg) : 150
Maximum hit energy (KJ) : 2.5
Hit number (min-1) : 180
Height of working area (mm) : 370
Tup axis to frame front (mm) : 350
Dimension of top die surface (mm) : 200*85
Dimension of bottom die surface (mm) : 200*85
Forges square (mm*mm) : 130*130
Forges round (mm) : Φ145
Motor type: Y180M-4-B3
Motor power (kw) : 18.5
Hammer weight (kg) : 3260
Arivil block weight (kg) : 1500
Outside size: 2390*1085*2150
