Recommended tap diameters: 4.75 to 50 mm
Max. swing: 92 mm
Max. length between centres: 305 mm
Max. length ground at one setting: 100 mm
Fitch range: 3 to .5 mm
Max. helix angle: 10 deg
No. of flutes: 2-12
Workspeeds (14 speeds in 2 ranges): 4.4-158 rpm
Workhead and tailstock centres: No. 2 M.T.
Grinding motor: 6 HP
Crushing and dresssing motor: 9 HP
Coolant tank capacity: 135 litres
Coolant pump capacity (water rating): 54 litres/min