Designed to forge, stamp and coin for a leading automotive manufacturer in the making of motor components, sprockets and gears
4" x 20" x 44" machined steel bolster is bolted to the ram rib weldment
8" x 20" x 44" bolster is bolted to the bed rib weldment
12" stroke Parker Cylinders
Ram speeds: 194 IPM approach; 40 IPM pressing; 155 IPM return
Hydraulic power system with 180 gallon oil reservoir
Oversized ram guide bushings for superior ram guidance and rigidity
1.5" x 20" straight side end frame reinforces the housing posts' sides and provide additional resistance to off center loading
100 ton capacity, 8" stroke, 8" x 40" bed ejector on press centerline
Bed ejector is rigidly guided by large diameter guideposts and bushings
Ejector hydraulic circuit includes a mechanical flow divider to automatically compensate for anticipated off center loading during ejection
Thermostatically controlled fan powered oil cooler
Bed to ram parallelism is monitored utilizing dual linear transducers
Press ram "trimmed" to maintain tight parallelism
Pedestal mounted controls with two hand touch buttons
Inch, semi-auto and full-auto cycle controls
Allen Bradley Micrologix PLC receives input from linear transducers on each side of press
