Technical Data: Hydraulic multi-opening press H 240 5 ES total vacuum press molding pressure 240 to spec. Compaction pressure at 100% Design 4 kg / cm pressing area 4000 x 1500 mm 5 floors clear opening width of the floors of 120 mm 10 compression cylinder 100 mm stroke of the cylinder 600 mm 6 pcs steel heating plates of RST 37.2 format 4000 x 1500 x 50 mm Aluverschleissbleche on the pressing surfaces heating medium is hot water to 130 C, all-metal tubing as a connection between plates and collecting ear feeding the press with a 1500 mm side Simultananschliessung the platens material of simultaneous compensation stainless steel mounted simultaneous compensation of the longitudinal sides of the press control of the press with Lüftzyklen press complete with tubes and a hose connecting the manifold to the existing heating system (saturated steam at 10 bar max. and 180 C) for standard flange temperature control system with all necessary fittings, expansion tank, hot water pump for Daürtemperatur of 140 C from the operation of interruptible pressing cylinder for pressing short workpieces insulation between the upper and lower platens of the press frame hydraulics at the Press mounted free-standing cabinet with integrated control, position is clarified, it is necessary to press into a pit to make in order to feed all the floors, embodiments according to DE regulations covering the upper part of the press with sheet aluminum paint
