INCLUDES 20ft POWERED INFEED AND OUTFEED CONVEYORS
5 1/2"x 20" Capacity semi-automatic cold saw. Miters 45 deg both directions. Hydraulic clamping. For Structural Steel

used Trennjaeger Longitudinal Circular Cold Saw
Model PMC 5

Designed for longitudinal and cross cutting of steel sections, plates and billets in straight and mitre cuts ±45°.
Machine capacities are: cutting height: 5.5”, cutting length: 20” with a tolerance of ± 0.008 in.

· Machine stand of solid steel construction.
· Planed machine table of high tensile strength steel.
· Cutting head unit adjustable dovetail guides.
· Gear box with large helical hardened gears.
· For segmental circular cold saw blade of 425mm (17”) diameter max 16” standard.
· Fixture for chip remover.
· Adjustable blade stabilizer.
· Centralized lubrication system for guide tracks of cutting head carriage.
· Two speed drive motor 1.8kw, 1500/3000 RPM, with Vee belt step pulley for 6 saw blade periphery speeds 40/82, 52/105 & 66/131 ft/min.
· Thermo-magnetic motor protection switch.
· Complete hydraulic equipment. Hydraulic motor, 1.5 HP, 1500 RPM, pump, pressure gauge and thermo-magnetic motor protection switch.
· Complete coolant system with 0.22 HP motor and pump.
· Manual control valves for saw feed and vertical and horizontal clamping.
· Hydraulic clamping with vertical adjustable longitudinally and horizontal clamping cylinder with 1½” stroke adjustable laterally.
· All hydraulic and electrical installations are easily accessible.
· Built-in tool and electrical cabinets.
· Machine finish – green.
· Operation voltage: 440 Volts, 60 cycle.

Includes turntable to turn machine into the line of material flow for miter cuts. When miter cutting the reference line on the saw and conveyor remains constant.