10' X 3/8"-1/2" NIAGARA HYDRAULIC SHEAR
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $24,500.00
Stock # 12176-P
Serial # 63746 New 1976 Model: HS-10-3/8-1/2
Rated Capacity at 5/16" Normal Slope: 3/8" Mild Steel
Rated Capacity at 1/2" Normal Slope: 1/2" Mild Steel
(2) 36" Long Front Mounted Material Supports
Blade Gap, Edge of Blade to Machine Frame: 7-1/2"
Knife Size: 1" x 4" x 122-3/4" Long
Distance Between Frames: 128-1/4"
EQUIPPED WITH:
48" Front Operated Swing Up Type Back Gage
NO Squaring Arm
Back Gage Traverse is Hydraulically Driven
Hydraulic Hold Downs
Lever Controlled Ram Rake Adjustment
Finger Guard Bar
Flush Floor Design
Overhead Work Lights and Mirrors
Electric Pedal Foot Trip Control
Bed Has Built In Roller Type Material Support (Rusty May Not Work Well)
Manually Adjustable Stroke Stop Limits for Up and Down Ram Traverse
NOTE: MISSING Original Factory Cycle Selector Switch
Original Factory Electrical System Has Been Altered
Current Cycles: Single Stroke Cut - ONLY
40 HP Main Motor, Wired for 3 Phase, 60 Hz, 230-460 Volts
Presently Wired for 440 Volt Operation
New Factory Manual with Parts and Schematics
Overall Size: 147" L-R x 95" F-B x 104" High x 22,500 Lbs.

10' X 3/8"-1/2" NIAGARA HYDRAULIC SHEAR
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $24,500.00

Stock # 12176-P
Serial # 63746 New 1976 Model: HS-10-3/8-1/2

Rated Capacity at 5/16" Normal Slope: 3/8" Mild Steel
Rated Capacity at 1/2" Normal Slope: 1/2" Mild Steel
(2) 36" Long Front Mounted Material Supports
Blade Gap, Edge of Blade to Machine Frame: 7-1/2"
Knife Size: 1" x 4" x 122-3/4" Long
Distance Between Frames: 128-1/4"

EQUIPPED WITH:
48" Front Operated Swing Up Type Back Gage
NO Squaring Arm
Back Gage Traverse is Hydraulically Driven
Hydraulic Hold Downs
Lever Controlled Ram Rake Adjustment
Finger Guard Bar
Flush Floor Design
Overhead Work Lights and Mirrors
Electric Pedal Foot Trip Control
Bed Has Built In Roller Type Material Support (Rusty May Not Work Well)
Manually Adjustable Stroke Stop Limits for Up and Down Ram Traverse
NOTE: MISSING Original Factory Cycle Selector Switch
Original Factory Electrical System Has Been Altered
Current Cycles: Single Stroke Cut - ONLY
40 HP Main Motor, Wired for 3 Phase, 60 Hz, 230-460 Volts
Presently Wired for 440 Volt Operation
New Factory Manual with Parts and Schematics
Overall Size: 147" L-R x 95" F-B x 104" High x 22,500 Lbs.