Dealer profile

Hildebrand Machinery Co.

Location:United States
Contact person:Dave Hildebrand
Contact phone:(+1) 717-846-2600
Contact fax:-
Languages:English

About us

Copy link

Send Request

For Sale Listings (156)

WINSLOW, HC101, DRILL, GRINDERS

Description:

Category: GRINDERS
Type: DRILL
Manufacturer: WINSLOW
Model: HC101

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, york
Price:950 USD
ID:AS17550

11 years ago Details

WINSLOW, HC101, DRILL, GRINDERS

Description:

Category: GRINDERS
Type: DRILL
Manufacturer: WINSLOW
Model: HC101

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:950 USD
ID:AS17548

11 years ago Details

WARNER & SWASEY, M-3500, TURRET, LATHES

Description:

Category: LATHES
Type: TURRET
Manufacturer: WARNER & SWASEY
Model: M-3500

3A WARNER & SWASEY SADDLE TYPE TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA ……... 3A WARNER & SWASEY SADDLE TYPE TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $29,500.00 Stock # 12204 Serial # 176290 New 1959 Lot # 28 Model # M3500 Square Head Swing Over Bed: 23-1/2" Max. Swing Over Carriage: 18" Max. Spindle Hole: 6-1/4" Spindle Nose: A-1-15" (32) Spindle Speeds: 12 to 851 RPM, Hydraulic Preselect (16) Carriage/Cross Slide Feeds: .005" to .167" Longitudinal; .0025" to .082" Cross (16) Saddle Feeds: .005" to .167" Longitudinal; .0096" to .096" Per Rev. Cross Distance Spindle to Turret Face: 59" Max. Length Turned: 43" Max. Cross Slide Travel: 15-1/2" Carriage Longitudinal Travel: 51" Turret Travel: 51" EQUIPPED WITH: 4-Way Turret Tool Post Cross Sliding Hexagon Turret 21" 3-Jaw Chuck with 2-Piece Chuck Jaws (No Hard Top Jaws) 6-1/4" Chuck Thru Hole Adjustable Powered Chuck Wrench with Internal & External Setting 2-Speed Motor with High-Low Gear Range Lead On Threading Gear Box with Carriage Half Nut (Half Nut Parts Missing) Hardened & Ground Bedways (Very Good Condition) Spindle Inching (Jog) 4-Way Rapid Traverse to Carriage/Cross Slide Rapid Traverse to Saddle (1) Long and (1) Short Flanged Type Turret Tool Holder (4) M1830 Warner Swasey 2-Hole Slide Tools (1) Live Center with Turret Bushings Rear of Spindle Tube is Threaded Hard Way Covers (Covers Missing at Rear of Saddle) Hydraulic Spindle Braking Index able Stops for Saddle Turret Automatic Lubrication System Chip Pan with Coolant Pump & Piping (Not Original OEM Pump) MISSING - Saddle Pilot Bar and Bracket 60/30 HP 2-Speed Motor, 75 FL Amps 3 HP, 230/460 Volts Power Chuck Wrench Motor Wired for 3 Phase, 60 Cycle, 440 Volts Only Overall Dimensions: 177" Long x 74" Wide x 72" High x 16,600 Lbs. Machine is in Good Physical and Running Condition

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:12
Location:United States, York
Price:-
ID:AS17546

11 years ago Details

WARNER & SWASEY, M-2250, TURRET, LATHES

Description:

Category: LATHES
Type: TURRET
Manufacturer: WARNER & SWASEY
Model: M-2250

#5 WARNER & SWASEY SLIDING GAP BED TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA... #5 WARNER & SWASEY SLIDING GAP BED TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $7,500.00 Stock # 12180-P Serial # 2119631 New 1965 Model # M2250, Lot # 63 Swing Over Ways: 20" Swing Over Carriage: 10-1/4" Swing in Gap: 31-1/2" Gap Bed Will Slide Back: Approx. 20" Max. Distance Chuck to Turret, Bed Closed: Approx. 28" Max. Distance Chuck to Turret, Bed Open: Approx. 47" Spindle Speeds: 25 to 1556 RPM Spindle Hole: 2-7/8" Spindle Nose: A1-8 (6) Carriage Feeds: .004 to .045 TPR (6) Cross Slide Feeds: .003 to .027 TPR (6) Turret Feeds: .005 to .048 TPR Turret Stroke: 12" EQUIPPED WITH: 12" Cushman 3-Jaw Chuck (No Hard Top Jaws) 5-1/2" Square Turret Tool Post 6-Position Rotary Turret Type Stops to Carriage & Turret Lead on Threading to Carriage & Turret Taper Attachment to Carriage (2) Adjustable Slide Tools, (3) Long Flanges & (1) Short Flange on Turret (8) Threading Leads for Turret & (1) for Carriage Coolant 20/10 HP Motor, Wired for 3 Phase, 60 Cycle, 440 Volts Overall Dimensions: 140" L x 62" W x 80" H

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:6
Location:United States, York
Price:7500 USD
ID:AS17544

11 years ago Details

WARNER & SWASEY, M-1200, TURRET, LATHES

Description:

Category: LATHES
Type: TURRET
Manufacturer: WARNER & SWASEY
Model: M-1200

#3 WARNER & SWASEY TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $3,950.00 S... #3 WARNER & SWASEY TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $3,950.00 Stock # 12147 Serial # 578256 Model # M-1200 Swing Over Ways: 15" Swing Over Cross Slide: 7" Cross Slide Travel: 8" Carriage Travel: 17" Carriage Feeds: .0025 to .026 TPR Max. Distance Turret Face to Spindle Nose: Approx. 26" 6-Position Turret Turret Feeds: .003 to .030 TPR Max. Turret Stroke: 10" (12) Spindle Speeds: 67 to 1480 RPM Spindle Hole: 1-27/32" Spindle Nose: A-6 Bar Feed Capacity: 1-1/2" 10" 3-Jaw Manual Chuck (3) Slide Tools Yuasa Quick Change Tool Post with (1) Tool Holder Manual Collet Closer (No Master Collet or Collet Nose Piece) Coolant Work Light 7-1/2 / 3-1/2 HP 2-Speed Motor, 3 Phase, 60 Cycle, 220 Volts Machine Overall Dimensions: 8-1/2' L x 4-1/2' W x 71" H

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17542

11 years ago Details

W.A. WHITNEY, 661, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: W.A. WHITNEY
Model: 661

W. A. WHITNEY 40 TON PLASMA PUNCH PRICE: On Location, PA Plant …………………………….. $30,000.00 Stock # N-... W. A. WHITNEY 40 TON PLASMA PUNCH PRICE: On Location, PA Plant …………………………….. $30,000.00 Stock # N-10204 Serial # 661-S10 Model # 661 X-Axis Travel: 120" Y-Axis Travel: 80" Maximum Sheet Thickness Burned: 3/4" Punching Capacity: 40 Tons 15-Position Turret Fanuc OOP CNC Control Sheet Loader Hypertherm HT2000 Power Supply Chip Conveyor Hydraulic System Machine in Production Until Approx. June 20, 2012

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17540

11 years ago Details

VOEST ALPINE, -empty-, ENGINE, LATHES

Description:

Category: LATHES
Type: ENGINE
Manufacturer: VOEST ALPINE
Model: -empty-

17" X 36" VOEST ENGINE LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA Stock # 11044 Seri... 17" X 36" VOEST ENGINE LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA Stock # 11044 Serial # 1-037-1-4091 Age Unknown Model # Unknown Built in Austria Swing Over Bed: 17" Swing Over Cross Slide: 10-1/2" Distance Between Centers: 36" Spindle Bore: 1-13/16" Spindle Nose: L-0 Tailstock Spindle Taper: #4 Morse (12) Spindle Speeds: 21 to 1,500 RPM (66) Longitudinal Feeds: .0027 to .150 IPR (66) Cross Feeds: .0014 to .075 IPR (66) Thread Range Inch: 1 to 56 TPI (66) Thread Range Metric: .5 to 28 MM EQUIPPED WITH: 10" 3-Jaw Chuck, 2-Piece Jaws with Hard Reversible Top Jaws, Plain Back with Adapter Plate 6" 3-Jaw Chuck, 2-Piece Jaws with Hard Reversible Top Jaws, Plain Back with Adapter Plate Adjustable Carriage Stop (5) Assorted Feed/Thread Change Gears Timken Bearings Chuck and Spanner Wrenches Diametral Pitch Threading Induction Hardened Bed Ways - Good Condition Threading Chasing Dial Removable Chip Pan 7.5 HP Motor, Wired for 3 Phase, 60 Hz, 220-440 Volts Presently Wired for 220 Volt Operation Overall Size: 84" Long x 30" F-B x 50" High x 4,000 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17538

11 years ago Details

VICTOR, S20100G, GAP, LATHES

Description:

Category: LATHES
Type: GAP
Manufacturer: VICTOR
Model: S20100G

20" X 100" VICTOR GAP BED LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 St... 20" X 100" VICTOR GAP BED LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12159 Serial # 712064 Model # S20100G Swing Over Ways: 20" Swing Over Cross Slide: 11" Swing in Gap: Approx. 28" Spindle Nose to End of Gap: 8" (16) Spindle Speeds: 31 to 1500 RPM Spindle Hole: 3-1/4" Spindle Nose: D1-8 EQUIPPED WITH: 2-1/2" Diameter Quill in Tailstock with #4 MT Inch/Metric Threading 12" 3-Jaw Chuck 9" & 4-1/2" Roller Steady Rests Full Length Rear Splash Guard 10 HP Motor, Wired 3 Phase, 60 Cycle, 220 Volts Overall Machine Size: 141" L x 48" W x 50" H

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17536

11 years ago Details

VICTOR, 24100G, ENGINE, LATHES

Description:

Category: LATHES
Type: ENGINE
Manufacturer: VICTOR
Model: 24100G

24" X 100" VICTOR GAP BED LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $15,000.00 St... 24" X 100" VICTOR GAP BED LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $15,000.00 Stock # 12158 Serial # 912042 Model # 24100G Swing Over Ways: 24" Swing Over Cross Slide: 14-1/2" Swing in Gap: Approx. 34" Distance from Spindle Nose to End of Gap: 11-1/2" (12) Spindle Speeds: 21 to 1500 RPM Spindle Nose: D1-8 Camlock Spindle Bore: 3-1/8" Cross Slide Feeds: 1.6 to 12.1 TPR Carriage Feeds: 3.6 to 26.6 TPR Inch Threading: 3-1/2 to 26 TPI Metric Threading: 1.25 to 11 TPMM Tailstock Quill Travel: 10" Quill Dia. 3-1/2" Quill Taper: #5 Morse EQUIPPED WITH: 15-3/4" 3-Jaw Chuck with 2-Piece Jaws & 5-1/4" Hole Full Length Rear Splashguard (3) Roller Steady Rests: 9", 13", 16" Chip Pans Coolant Micrometer Carriage Stop Chuck Chip/Splash Guard 15 HP Motor, Wired 3 Phase, 60 Cycle, 220 Volts Overall Size: 13' L x 53" W x 52" H

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17534

11 years ago Details

VERTICUT, 115B, BAND, VERTICAL, SAWS

Description:

Category: SAWS
Type: BAND, VERTICAL
Manufacturer: VERTICUT
Model: 115B

VERTICUT VERTICAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 Stock # 12... VERTICUT VERTICAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 Stock # 12038 Serial # 3957 New 12/1996 Model # 115B Max. Work Piece Height: 13-1/2" Saw Head Infeed Travel: 13" Distance from Blade to Saw Frame: 9" L-R Distance from Cutting Edge of Saw Blade Back to Machine Frame: 10-1/2" Adjustable Sliding Infeed Stop to Saw Head Sliding Feed Weight to Adjust Feed Force Roller Blade Guides 3/4" Blade Work Table: 30" L-R x 18" F-B Work Stop Jaw: 6-1/2" Long x 4-7/8" High & Can Swivel 45 Degrees Manual Blade Tension Adjustment (4) Blade Speeds Via 4-Position Step Pulley 3/4 HP Motor, Single Phase, 110 Volts Machine Overall Dimensions: 52" F-B x 30" Wide x 72" High Machine is Mounted on (4) 3" Dia. Casters New Machine Price: $3,995.00

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1996
Location:United States, York
Price:-
ID:AS17532

11 years ago Details

U.S. BAIRD, 00, FORMING, WIRE MACHINERY

Description:

Category: WIRE MACHINERY
Type: FORMING
Manufacturer: U.S. BAIRD
Model: 00

Seller name:
Hildebrand Machinery Co.

YOM:1976
Location:United States, York
Price:7500 USD
ID:AS17529

11 years ago Details

TWIN PINES, TPM-30-T-1, MOLDING, PRESSES

Description:

Category: PRESSES
Type: MOLDING
Manufacturer: TWIN PINES
Model: TPM-30-T-1

TWIN PINES COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00... TWIN PINES COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12201 Serial # TPM-30-T-I-2002-306 New 2002 Model: TPM-30-T-I Was Used for Compression Molding Rubber Rated Capacity: 30 Ton Dual Trip Finger Buttons Upper Platen Injection System Electrically Heated Platen System on Bed and Ram Heated Platen Size: 16" x 16" Press Ram Size: 25" L-R x 16" F-B x 3-1/2" Thick Press Bed Size: 15-1/2" F-B x 26-1/2" L-R x 3" Thick (Work Area) Distance Thru Frames: 19" Allen Bradley Panel View Plus 600 PLC Control Buttons For: Control Power On-Off, Hydraulic Start-Stop and Emergency Stop (4) Adjustable Machine Leveling Feet Hydraulic System Attached to Rear of the Machine Hydraulic Oil Heat Exchange Unit 10 HP Baldor Hydraulic Motor, 1760 RPM Wired for 3 Phase, 60 Hz, 208-230-460 Volts Daylight (Ram to Bed Max.): 16-1/4" Vertical Transfer Mold Press Hydraulic Piston on Ram for Molding Stroke Length: Unknown Machine Appears to be in Good As Taken From Service Condition Overall Size: 43" L-R x 71" F-B x 92" High x 6,500 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2002
Location:United States, York
Price:-
ID:AS17527

11 years ago Details

TOYODA, FA450II, HORIZONTAL, MACHINING CENTERS

Description:

Category: MACHINING CENTERS
Type: HORIZONTAL
Manufacturer: TOYODA
Model: FA450II

TOYODA CNC HORIZONTAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $49,500.0... TOYODA CNC HORIZONTAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $49,500.00 Stock # 11296 Serial # NM8236 New 1997 Model # FA-450II Pallet Size: 17.72" x 17.72" X-Axis Table Travel: 23.60" Y-Axis Head Travel: 23.60" Z-Axis Saddle Travel: 23.60" Spindle Taper: Cat 40 Spindle Speeds: 14,000 RPM Spindle Motor: 10 HP Automatic Tool Changer: 40 Positions Approx. Weight: 26,000 Lbs. Approx. Dimensions: 16.33' L x 9' W Tallest Auxiliary Piece: 11' EQUIPPED WITH: Fanuc 15M Control Turbo Chip Conveyor 17.72" Square Pallets 1 Degree Table Indexing 40-Position Tool Changer Rigid Tapping Through Spindle coolant Through Spindle Air Blow Turn Table Pallet Changer Door Interlock Prepped for Touch Center Tool Breakage Detection Spindle Chiller Hydraulic Fixture Assembly Auxiliary Equipment

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1997
Location:United States, York
Price:-
ID:AS17525

11 years ago Details

TOSHIBA SHIBAURA, TX13, VERTICAL TURRET, LATHES

Description:

Category: LATHES
Type: VERTICAL TURRET
Manufacturer: TOSHIBA SHIBAURA
Model: TX13

49" SHIBAURA TOSHIBA OPEN SIDE VERTICAL TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, P... 49" SHIBAURA TOSHIBA OPEN SIDE VERTICAL TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $79,500.00 Stock # 12093-P Serial # 320163 New 1981 Model # TX-13 Table Diameter: 49.2" Maximum Swing: 63" Maximum Turning Height: 41.3" Horizontal Travel of Rail Head: 3.9" to 31.5" Vertical Travel of Turret Ram: 29.5" Swivel Angle of Rail Head: +/- 30 Degrees Vertical Travel of Cross Rail: 23.6" Maximum Table Load: 11,000 Lbs. Maximum Table Torque: 11,600 Ft./Lbs. Maximum Cutting Force of Rail Head: 4,410 Lbs. (12) Table Speeds: 4.5 to 200 RPM (12) Feed Rates: .003 to .140 Inch/Rev. Rapid Traverse of Rail Head: 125 IPM Traverse Speed of Cross Rail: 16.1 IPM EQUIPPED WITH: 4-Jaw Chuck (No Chuck Jaws) 5-Position Turret Pendant Control 2-Axis Anilam Mini Wizard DRO Operator Platform, Ladder and Guarding Manuals Hydraulic System Coolant System Coolant Skimmer Note: Machine is Equipped with Threading Option but Would Require Change Gears that are Missing. Gears Would Need to be Purchased by Buyer. (16) Threads with Required Change Gears: 3 to 24 TPI 24/30 HP Main Motor Wired for 3 Phase, 60 Cycle, 230/460 Volts Motor is Floor Mounted SHIPPING DIMENSIONS: Main Machine: 125" L-R x 91" F-B x 113" H Operator Platform and Ladder: 100" L-R x 60" F-B x 60" H Hydraulic System: 22" L-R x 19" F-B x 32" H Coolant Skimmer: 27" L-R x 18" F-B x 27" H Coolant and Parts on Pallet: 45" L-R x 48" F-B x 30" H Pallet of Guarding: 48" L-R x 48" F-B x 48" H Main Motor: 34" L-R x 20" F-B x 20" H

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1981
Location:United States, York
Price:-
ID:AS17522

11 years ago Details

Page 1 of 12

Hildebrand Machinery Co.

{{ title }}