Dealer profile

Hildebrand Machinery Co.

Location:United States
Contact person:Dave Hildebrand
Contact phone:(+1) 717-846-2600
Contact fax:-
Languages:English

About us

Copy link

Send Request

For Sale Listings (156)

H.E.S, CHOLET 660, ENGINE, LATHES

Description:

Category: LATHES
Type: ENGINE
Manufacturer: H.E.S
Model: CHOLET 660

24" x 130" HES ENGINE LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA Stock # 07307 Serial... 24" x 130" HES ENGINE LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA Stock # 07307 Serial # 11448New 1970Type: Cholet 660 Made in France CATALOGUE SPECIFICATIONS: Swing Over Bed Ways: 26" Swing Over Cross Slide: 24-3/8" Spindle Nose: ASA-A1-6" Direct Bolt on Type Spindle Bore: 2-1/16" Headstock Bore Taper: 60 Metric (18) Spindle Speeds: 36 to 1800 RPM (28) Longitudinal Feeds: 0.002 to 0.028 Thousandths Per Revolution (28) Cross Feeds: 0.0015 to 0.018 Thousandths Per Revolution (28) Metric Pitches: 0.5 to 7 (28)Whitworth Pitches: 56 to 4 Threads Per Inch NOTE: Does Not Have All Necessary Quadrant Gears for a Full Range Feeds & Threads. Leadscrew Pitch: 4 Threads Per Inch (6 mm) Cross Slide Travel: 13-3/4" Top Compound Travel: 6-1/8" EQUIPPED WITH Hardened and Ground Bed Ways in Good Condition Thread Chasing Dial Rapid Traverse to Carriage and Cross Slide Carriage and Cross Slide Feed Stops All Movement Dials have Inch Graduations on Them Quick Change Tool Post with (1) Holder 16" 4-Jaw Chuck with 1-Piece Hard Reversible Chuck Jaws 15-3/4" 3-Jaw Chuck with 2-Piece Jaws and Hard Reversible Top Jaws 8-1/4" Dead Type Steady Rest 6-3/4" Dead Type Steady Rest (2) Removable Chip Pans Tailstock Quill Diameter: 3-1/4" with #5 Morse Taper Adjustable Carriage Stop Machine Work Light Foot Pedal Spindle Brake One Shot Carriage Lubrication System HES Instruction and Parts Manual NO Chuck Wrenches ? HP Coolant Pump Motor, No Coolant Piping 12 HP Main Motor, Presently Wired for 3 Phase, 60 Cycle, 220 Volts Overall Size: 189" Long x 47" F-B x 56" High x Approx. 7,300 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1970
Location:United States, york
Price:7500 USD
ID:AS17347

12 years ago Details

GRIMCO, -empty-, MOLDING, PRESSES

Description:

Category: PRESSES
Type: MOLDING
Manufacturer: GRIMCO
Model: -empty-

GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,5... GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12197 Serial # 47400409-2 New May 2009 Was Used for Compression Molding Rubber Rated Capacity 30 Ton Electrically Heated Platen System on Bed and Ram: 15" L-R x 13-3/8" F-B Press Bed Size: 16-5/8" F-B x 30" L-R x 1-7/8" Thick Bed Bolster Plate: 16-5/8" F-B x 30" L-R x 3" Thick Centerline of Bed and Ram to Machine Frame: 12-1/8" Vertical Ram Stroke Length: Unknown Dual Operation Palm Buttons Red Lion Digital PLC Control System Manual Switches For: System: Manual-Auto Control: On-Off Pump: On-Off Emergency Stop Hydraulic Oil Heat Exchanger System 7-1/2 HP Hydraulic Pump Motor Wired for 3 Phase, 50/60 Hz, 208-230-460-380 Volts .33 HP Heat Exchange Fan Motor, Wired for 230-460 Volts Machine Appears to be in Good As Taken From Service Condition Overall Size: 39" L-R x 68" F-B x 108-1/2" High x 7,800 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2009
Location:United States, York
Price:12500 USD
ID:AS17345

12 years ago Details

GRIMCO, -empty-, MOLDING, PRESSES

Description:

Category: PRESSES
Type: MOLDING
Manufacturer: GRIMCO
Model: -empty-

GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,5... GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12198 Serial # 43901107-1 New November 2007 Was Used for Compression Molding Rubber Rated Capacity: 30 Ton Electrically Heated Platen System on Bed and Ram: 15" L-R x 13-3/8" F-B Press Bed Size: 16-5/8" F-B x 30" L-R x 1-7/8" Thick Bed Bolster Plate: 16-5/8" F-B x 30" L-R x 3" Thick Centerline of Bed and Ram to Machine Frame: 12-1/8" Vertical Ram Stroke Length: Unknown Dual Operation Palm Buttons Red Lion Digital PLC Control System Manual Switches For: System: Manual-Auto Control: On-Off Pump: On-Off Emergency Stop Hydraulic Oil Heat Exchanger System 7-1/2 HP Hydraulic Pump Motor Wired for 3 Phase, 50/60 Hz, 208-230-460-380 Volts .33 HP Heat Exchange Fan Motor, Wired for 230-460 Volts Machine Appears to be in Good As Taken From Service Condition Overall Size: 39" L-R x 68" F-B x 108-1/2" High x 7,800 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2007
Location:United States, York
Price:12500 USD
ID:AS17343

12 years ago Details

GRIMCO, -empty-, MOLDING, PRESSES

Description:

Category: PRESSES
Type: MOLDING
Manufacturer: GRIMCO
Model: -empty-

GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,5... GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12199 Serial # 43901107-2 New November 2007 Was Used for Compression Molding Rubber Rated Capacity: 30 Ton Electrically Heated Platen System on Bed and Ram: 15" L-R x 13-3/8" F-B Press Bed Size: 16-5/8" F-B x 30" L-R x 1-7/8" Thick Bed Bolster Plate: 16-5/8" F-B x 30" L-R x 3" Thick Centerline of Bed and Ram to Machine Frame: 12-1/8" Vertical Ram Stroke Length: Unknown Dual Operation Palm Buttons Red Lion Digital PLC Control System Manual Switches For: System: Manual-Auto Control: On-Off Pump: On-Off Emergency Stop Hydraulic Oil Heat Exchanger System 7-1/2 HP Hydraulic Pump Motor Wired for 3 Phase, 50/60 Hz, 208-230-460-380 Volts .33 HP Heat Exchange Fan Motor, Wired for 230-460 Volts Machine Appears to be in Good As Taken From Service Condition Overall Size: 39" L-R x 68" F-B x 108-1/2" High x 7,800 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2007
Location:United States, York
Price:12500 USD
ID:AS17341

12 years ago Details

GRIMCO, -empty-, MOLDING, PRESSES

Description:

Category: PRESSES
Type: MOLDING
Manufacturer: GRIMCO
Model: -empty-

GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,5... GRIMCO HYDRAULIC COMPRESSION MOLDING PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00 Stock # 12200 Serial # 47400409-1 New May 2009 Was Used for Compression Molding Rubber Rated Capacity: 30 Ton Electrically Heated Platen System on Bed and Ram: 15" L-R x 13-3/8" F-B Press Bed Size: 16-5/8" F-B x 30" L-R x 1-7/8" Thick Bed Bolster Plate: 16-5/8" F-B x 30" L-R x 3" Thick Centerline of Bed and Ram to Machine Frame: 12-1/8" Vertical Ram Stroke Length: Unknown Dual Operation Palm Buttons Red Lion Digital PLC Control System Manual Switches For: System: Manual-Auto Control: On-Off Pump: On-Off Emergency Stop Hydraulic Oil Heat Exchanger System 7-1/2 HP Hydraulic Pump Motor Wired for 3 Phase, 50/60 Hz, 208-230-460-380 Volts .33 HP Heat Exchange Fan Motor, Wired for 230-460 Volts Machine Appears to be in Good As Taken From Service Condition Overall Size: 39" L-R x 68" F-B x 108-1/2" High x 7,800 Lbs.

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2009
Location:United States, York
Price:-
ID:AS17339

12 years ago Details

GIDDINGS & LEWIS, HC EXACTAMATIC, DRILL, GRINDERS

Description:

Category: GRINDERS
Type: DRILL
Manufacturer: GIDDINGS & LEWIS
Model: HC EXACTAMATIC

GIDDINGS & LEWIS WINSLOW EXACTAMATIC DRILL GRINDER PRICE: Loaded on Truck, Our Warehouse, York,... GIDDINGS & LEWIS WINSLOW EXACTAMATIC DRILL GRINDER PRICE: Loaded on Truck, Our Warehouse, York, PA Stock # 07039-P Serial # 940-00174-77 New 1977 Model # HC CATALOGUE SPECIFICATIONS: Drill Diameter Capacity Range: 1/16" to 1-1/2" (With Proper Holders, Not All Supplied) Drill Diameter Conventional Point: 1/16" to 1-1/2" Drill Diameter 4-Facet Point: 1/16" to 1.0" Drill Diameter Helical Point: 1/16" to 1.0" Drill Diameter Racon Point: 1/16" to 1.0" Drill Diameter Split Point: 1/16" to 0.5" Variable Point Angle Degrees Range: 90 to 140 (60 to 180 Deg. Optional, Consult Factory) Grinding Wheel Size: 12" Dia. x 3/4" Wide x 5" Hole EQUIPPED WITH: Inch – Metric Drill Size Ability For All Standard Right Hand Drills (Left Hand is Optional, Consult Factory) For Straight Shank and Tapered Shank Drills Automatic Grinding Cycle Drill Bit in Drill Holder Timing Fixture Air Infeed Attachment Grinding Wheel Dresser (11) Standard Drill Holders Up to 1" Capacity Large Bits Require Solid Type Drill Bushings Bored to Drill Size (7) Bushing Index Plates with Wood Box (1) Wheel Hub, (1) Cam Plate Built in Flood Type Coolant System 1 HP Spindle Motor, Wired for 3 Phase, 60 Cycle, 230/460 Volts 1/4 HP Workhead Motor Floor Space Required: 4' 2" W x 3' 2" D x 1,100 Lbs. Parts and Operations Manual Some Point Styles & Sizes Require an Optional Kit Not Presently with the Machine ________________________________________

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1977
Location:United States, York
Price:-
ID:AS17337

12 years ago Details

GIDDINGS & LEWIS, HC EXACTAMATIC, DRILL, GRINDERS

Description:

Category: GRINDERS
Type: DRILL
Manufacturer: GIDDINGS & LEWIS
Model: HC EXACTAMATIC

Seller name:
Hildebrand Machinery Co.

YOM:1982
Location:United States, York
Price:2950 USD
ID:AS17335

12 years ago Details

FOSTORIA, E-02057, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: FOSTORIA
Model: E-02057

FOSTORIA INFRARED ELECTRIC OVEN PRICE: Loaded on Truck, Our Warehouse, York, PA …… $4,950.00 Stock... FOSTORIA INFRARED ELECTRIC OVEN PRICE: Loaded on Truck, Our Warehouse, York, PA …… $4,950.00 Stock # 11225 Serial # SP1773E2 Model: E-02057 Chamber Size: 22" L-R x 20" High x 44" Deep Rated: 29.2 KW, 40 Amps, Circuit Amps 20 Input Voltage: 3 Phase, 60 Hz, 480 Volts Full Load Amps: 36 3650 Watts Per Heater Element Lamp Distance Floor to Table Top: 25" Digital Temperature Control Digital Batch Timer Control Dual Swing Open Front Doors Chamber Has a Pull Out Metal Work Table: 20" Wide x 36" Long (8) 40" Long Glass Tube Instant On/Off Quartz Lamp Heating Elements - In VG Condition Each Heating Element is 3650 Watts, 480 Volts, A2 Safety Micro Switches Sensing Open Doors Stainless Steel Chamber Note: There is No bottom Panel to Make this a Fully Enclosed Heat Chamber. It is Designed this Way. NO Fan or Blower System for Chamber Overall Size: 52" L-R x 46" F-B x 63-1/4" High Present Overall Condition of the Oven is Excellent The Temperature of the Oven is Based on the Wattage of the Heating Elements. The Elements Can be Changed to Suit a Required Temperature. Present Temperature Rating is Unknown, Consult Fostoria for this Information. It is Recommended that All Elements be Removed From the Oven During Shipping to Avoid Breakage. Made in Fostoria, Ohio, USA

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17333

12 years ago Details

FINISHING ASSOCIATES, VC-12, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: FINISHING ASSOCIATES
Model: VC-12

FINISHING MACHINE CO. 4 BARREL TUMBLING MACHINE PRICE: Loaded on Truck, Our Warehouse, York, PA ……... FINISHING MACHINE CO. 4 BARREL TUMBLING MACHINE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,950.00 Stock # 12108-P Serial # 4059 New 10/2004 Model # VC-12 Barrel Capacity: 3 Liter (0.1 Cu. Ft.) Each x 4 Octagon Barrels Barrel Size: 4-13/16" Across Flats x 8-1/4" Deep Barrel Liner: Drop-In Hot Pour PU Liner, 5/16" Thick For Wet or Dry Applications Small Octagon Barrels are Fixed on Larger Rotating Turret Machine is Mounted on Castors Variable Turret Speed: 0 to 250 RPM Jog Switch to Position Barrel Easy Lock Barrel & Lid Mechanisms Self Adjusting Barrel Lid Hold Down Cams Easy Read Out Timer RPM Accurately Read from Turret V Belt Driven Drum Turret Actech Variable Speed Motor Controller 2 HP AC Motor with DC Magnetic Disc Brake Unit 230-460 Volt, 1720 RPM Motor, Presently Wired for 480 Volts Overall Size: 36" L-R x 30" F-B x 43" High on Casters

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2004
Location:United States, York
Price:-
ID:AS17331

12 years ago Details

FINISHING ASSOCIATES, VC-12, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: FINISHING ASSOCIATES
Model: VC-12

FINISHING MACHINE CO. 4 BARREL TUMBLING MACHINE PRICE: Loaded on Truck, Our Warehouse, York, PA ……... FINISHING MACHINE CO. 4 BARREL TUMBLING MACHINE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $6,950.00 Stock # 12109-P Serial # 4060 New 10/2004 Model # VC-12 Barrel Capacity: 3 Liter (0.1 Cu. Ft.) Each x 4 Octagon Barrels Barrel Size: 4-13/16" Across Flats x 8-1/4" Deep Barrel Liner: Drop-In Hot Pour PU Liner, 5/16" Thick (4) New Never Used Octagon Barrels with Easy Lock Barrel & Lid Mechanisms and Self Adjusting Barrel Lid Hold Down Cams Can be Used for Wet or Dry Applications Small Octagon Barrels are Fixed on Larger Rotating Turret Machine is Mounted on Castors Variable Turret Speed: 0 to 250 RPM Jog Switch to Position Barrel Easy Read Out Timer RPM Accurately Read from Turret V Belt Driven Drum Turret Actech Variable Speed Motor Controller 2 HP AC Motor with DC Magnetic Disc Brake Unit 230-460 Volt, 1720 RPM Motor Presently Wired for 480 Volts Overall Size: 36" L-R x 30" F-B x 43" High on Casters

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:2004
Location:United States, York
Price:-
ID:AS17329

12 years ago Details

FARREL, DOUBLE WHEEL, ROLL, GRINDERS

Description:

Category: GRINDERS
Type: ROLL
Manufacturer: FARREL
Model: DOUBLE WHEEL

Seller name:
Hildebrand Machinery Co.

YOM:1973
Location:United States, York
Price:75000 USD
ID:AS17327

12 years ago Details

EURO SOURCE, -empty-, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: EURO SOURCE
Model: -empty-

50 AMP EURO SOURCE SINKER EDM PRICE: Loaded on Truck, Our Warehouse, York, PA …… $4,500.00 Stock #... 50 AMP EURO SOURCE SINKER EDM PRICE: Loaded on Truck, Our Warehouse, York, PA …… $4,500.00 Stock # 07264 Serial # 405528 New 1995 Made in Taiwan Table Working Surface: 19-1/2" x 10" with (3) T-Slots Inside Tank Dimensions: 29" L-R x 17-1/2" F-B x 11" Deep Table Travel: Approx. 12-1/4" Saddle Travel: Approx. 10-1/2" Ram Vertical Travel: Approx. 12" Maximum Distance Table to 3R Head: Approx. 15-1/2" Maximum Distance Table to Ram Housing: 11-1/4" 50 Amp Power Supply Operator Control with Amp & Volt Meters, Gap Setting, Anti Arc Height, Sens, Arc Stop, Speed, Working Time, On Time, Off Time (7) Positions for Working Current LV: 1/12 - 1/8 - 1/4 - 1/2 - 1 - 1-1/2 - 2 Hand Held Remote for Micro Finish & Hardened Steel Hand Held Remote for Ram Travel (4) Coolant Nozzles, Flood Coolant Level Control 8' x 15" Taft Peirce Permanent Magnetic Chuck 1/2 HP Coolant System with Cartridge Type Filtration 3-Axis Acu-Rite DRO Scales BUT NO Readout Display- Scales ONLY 3R Orbiter Head with System 3R Orbi-Cut Servo Control (6) New Cartridge Type Coolant Filters Machine Overall Dimensions: 45" F-B x 49" L-R x 84" H with Ram Up Power Supply & Control: 23" L-R x 30" F-B x 72" H (Mounted on Casters)

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:1995
Location:United States, york
Price:-
ID:AS17325

12 years ago Details

DOALL, ZEPHYR, BAND, VERTICAL, SAWS

Description:

Category: SAWS
Type: BAND, VERTICAL
Manufacturer: DOALL
Model: ZEPHYR

Seller name:
Hildebrand Machinery Co.

YOM:1979
Location:United States, york
Price:5500 USD
ID:AS17323

12 years ago Details

DOALL, V-36, BAND, VERTICAL, SAWS

Description:

Category: SAWS
Type: BAND, VERTICAL
Manufacturer: DOALL
Model: V-36

36" DOALL VERTICAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,250.00 Stock # 1... 36" DOALL VERTICAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,250.00 Stock # 11256 Serial # 36443195 New 1949 Model # V36 Variable Blade Speeds: 50 to 1600 FPM Via 2-Speed Blade Width: 1/4" to 1" with Proper Blade Guides Main Table: 30-1/2" x 30-1/2" Table Tilts: 45 Degrees Right & 15 Degrees Left Table Tilts: 10 Degrees Up & Down Maximum Height Under Blade Guide: 10" (With Blade Tension Handle Removed) Auxiliary Work Support Table: 20" F-B x 16-3/4" L-R Trans. & Vari Speed Sheave (3) 16" Diameter Rubber Covered Blade Drive Wheels EQUIPPED WITH: Hydraulic Power Table Feed Presently has 1/4", 3/8" & 1/2" Blade Guides Manual Blade Tension Adjustment Manual Blade Tracking Adjustment of Top Wheel Doall Blade Welder with Anneal and Grinder Air Blower Pump Machine Work Light 25" Long x 1-1/2" High Adjustable Table Rip Fence 1/3 HP Hydraulic Pump Motor, 230 Volts Only 1 HP Motor, Wired 3 Phase, 60 Cycle, 220-440 Volts Presently Wired For 440 Volts (Has Internal Transformer for Other Connections)

View all description View short description

Seller name:
Hildebrand Machinery Co.

YOM:-
Location:United States, York
Price:-
ID:AS17321

12 years ago Details

Page 8 of 12

Hildebrand Machinery Co.

{{ title }}