Fa. Alexander Bernath zu Bernathfalva

For Sale Listings (11)

Unknown, RMS 2000, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: Unknown
Model: RMS 2000

Technical data: the RMS 2000 is an optical measuring system. RMS stands for Remote Measuring System.... Technical data: the RMS 2000 is an optical measuring system. RMS stands for Remote Measuring System. The system consists of 2 to 8 theodolites, a connecting system and a PC with printer or Plotter.Die computations with the software MESCAL is implemented. Function mode: The computer learns over a calibration procedure the accurate position each individual theodolites in the area. Further it takes up the angles of traverse, etc.. After the calibration each measuring point with two theodolites must be angezielt. Each theodolite conveys two angles to the computer: one in purchase to its horizontal plane and one in purchase to its vertical level. The computer and/or MESCAL computes the space coordinates of the measuring points from the developed angles. Therefore the RMS has 2000 practically no measuring volume borders. Ranges of application: - everywhere, where contactless measuring is necessary - everywhere, where workpieces cannot be measured with a coordinate measuring machine (due to of size or management) the accuracy become as yardstick between measured length and the expected measurement inaccuracy indicated. This yardstick is 1: 100000 with an normalexperienced user. That is called 0.1 mm with a measuring length of 10 m is the measurement inaccuracy. The connecting system consists of an Multichannel interface, a multiplexer and a 1,5m cable between interfaces and multiplexers. In addition a 50m long multiplex line cable and 1.5 m a long cable is necessary, for the connection with the communication unit for each theodolite. The communication unit provides for a stable connection with large distances. Measuring accuracy: Yardstick 1: 100,000 software: MESCAL (PTB certified) tracer: optically The measuring system is as good as new

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:2005
Location:Germany, Hessen
Price:-
ID:AS8269

1

12 years ago Details

DEA, IOTA DIAMOND 0101 CNC / DCC, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: DEA
Model: IOTA DIAMOND 0101 CNC / DCC

1.DEA-IOTA: DIAMOND 0101 DCC measuring range: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal bui... 1.DEA-IOTA: DIAMOND 0101 DCC measuring range: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal building method Dimensions length : 1500 mm Width: 1200 mm, Height: 2800 mm weight/KMG: approx. 3 t Positioning uncertainty 1:+4.0µm Positioning uncertainty 3:+4.5µm Maximum table load: 1,000 kg Compressed air feed circuit: Minimum air pressure 5 bar, consumption approx. 150 Nl/min Electrical connection: 220V/50 to 60HZ Environment temp. : 20 C + 3 C 2.PC with printer after newest state of the art 3.Software Quindos with the program modules ...Basis ...Form and position tolerances ...Statistics Basis ...Diagram Ball ...disk monitoring Inclusive installation 4.Packaging, transport, insurance at cost The measuring machine is as good as new.

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1995
Location:Germany, Hessen
Price:-
ID:AS8268

1

12 years ago Details

DEA, IOTA 0102 CNC/DCC, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: DEA
Model: IOTA 0102 CNC/DCC

Measuring volume: X= 625, Y= 1025, Z= 465 Overall Dimensions: 1929mm x 1257mm x 2720mm Weig... Measuring volume: X= 625, Y= 1025, Z= 465 Overall Dimensions: 1929mm x 1257mm x 2720mm Weight: ca. 3 t incl.Software Quindos Probehead Renishaw PH9 + TP2/TP20 PC and Printer (up to date technical level at delivery time incl. installation not incl. transport. The machine is in a very good condition, actually not a "used machine", but completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s).

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:2006
Location:Germany, Hessen
Price:-
ID:AS8267

1

12 years ago Details

BROWN & SHARP, Tesa 343 CNC, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: BROWN & SHARP
Model: Tesa 343 CNC

TESA 343 CNC Measuring Volume: x = 300mm y = 400mm z = 300mm Length measuring uncertainity... TESA 343 CNC Measuring Volume: x = 300mm y = 400mm z = 300mm Length measuring uncertainity according to VDI/VDE 2617 (2,1) U1 = 4 + 4L/1000 guidelines in µm (including probe head) U3 = 4 + 5L/1000 Probehead:Renishaw PH6 with TP2 or TP20 (at your choice ) CNC Controller Software Quindos 1Measuringprogram Calibrationsphere Starprobe 1 vertikal + 4 horizontal PC and Printer (up to date technical level at delivery time) incl. installation not incl. transport. The machine is brand-new in our work been mounted and tested,

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1998
Location:Germany, Hessen
Price:-
ID:AS8266

1

12 years ago Details

BROWN & SHARPE, -empty-, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: BROWN & SHARPE
Model: -empty-

TESA 343 DCC Measuring Volume: x = 300mm y = 400mm z = 300mm Length measuring uncertainity ac... TESA 343 DCC Measuring Volume: x = 300mm y = 400mm z = 300mm Length measuring uncertainity according to VDI/VDE 2617 (2,1) U1 = 4 + 4L/1000 guidelines in µm (including probe head) U3 = 4 + 5L/1000 Probehead:Renishaw PH6 with TP2 or TP20 (at your choice ) CNC Controller Software Quindos6 1Measuringprogram Calibrationsphere Starprobe 1 vertikal + 4 horizontal PC and Printer (up to date technical level at delivery time) incl. installation not incl. transport. The machine is brand-new in our work been mounted and tested,

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1998
Location:Germany, Hessen
Price:-
ID:AS8265

1

12 years ago Details

ICNCMT, -empty-, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: ICNCMT
Model: -empty-

IPC Black-Box/WB-05 DCC Controller for RETROFIT of Measuring Machines ADVANTAGES : -for custom... IPC Black-Box/WB-05 DCC Controller for RETROFIT of Measuring Machines ADVANTAGES : -for customer optimized retrofit of a 3D-Coordinate Measuring Machines (CMM), no matter if manual driven or DCC. -Reliability and flexibility by well-tried and world-wide experienced software -Spares the cost for new constructions and facilities (CMM, measuring room, environment and temperature control, a.s.o.) 3D-Coordinate Measuring Machines (CMM) represent a high investment. This is the reason why they should be in use over many years. Mostly the CMM’s are moving on air bearing, this is why they have practically no wear, opposite to the other machine tools. While in most cases the mechanics of a CMM is as good as new, especially if the CMM was serviced normally, the DCC electronics, along with the hard- and software of the evaluation system became over few years obsolete, due to the rapid pace of the technical development in electronics and computer area. We offer with the Black-Box/WB-05 DCC Controller an optimal, economical solution of your measuring problems, shaped on your needs. The retrofit of your existing CMM’s is a cost-effective alternative to buying a new CMM. The efficiency of the measurements is the same as for a new machine

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:2006
Location:Germany, Hessen
Price:-
ID:AS8264

2

12 years ago Details

SHEFFIELD, Apollo RS-50, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: SHEFFIELD
Model: Apollo RS-50

Measuring machine Apollo RS-50 DCC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm... Measuring machine Apollo RS-50 DCC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm Design: Mobile, closed portal External dimensions: h= 3600 mm b= 2000 mm t = 2600 mm Weight/KMG: approx. 3 t Length measuring uncertainty: U1 = (6 + 6L/1000) m L in mm Maximum table load: 2,500 kg Compressed air feed circuit: Minimum air pressure 6 bar, oil-free consumption approx. 150 Nl/min Electrical connection: 220 V/50 up to 60 cycles per second Environment temp to Adherence to the accuracy environment temp: 20 C + 1 C Temp. - gradients/hour: 0.7 K/h temp. - gradients: 0.7 K/m computer: PC with printer after newest state of the art Software: Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring controller:WB.05 incl. installation not incl. transport, insurance and packing The machine is brand-new in our work been mounted and tested,

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1999
Location:Germany, Hessen
Price:-
ID:AS8263

1

12 years ago Details

DEA, IOTA DIAMOND 0101, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: DEA
Model: IOTA DIAMOND 0101

DEA-IOTA: DIAMOND 0101 DCC Measuring volume: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal... DEA-IOTA: DIAMOND 0101 DCC Measuring volume: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal building method Dimensions Length : 1500 mm Width: 1200 mm, Height: 2800 mm Weight/KMG: approx. 3 t Positioning uncertainty 1:+4.0µm Positioning uncertainty 3:+4.5µm Maximum table load: 1,000 kg Compressed air feed circuit: Minimum air pressure 5 bar, consumption approx. 150 Nl/min Electrical connection: 220V/50 to 60HZ Environment temp. : 20 C + 3 C 2.PC with printer after newest state of the art 3.Software Quindos with the program modules ...Basis ...Form and position tolerances ...Statistics Basis ...Diagram Ball ...disk monitoring Inclusive installation 4.Packaging, transport, insurance at cost The measuring machine is as good as new

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1995
Location:Germany, Hessen
Price:-
ID:AS8262

1

12 years ago Details

DEA, DEA 0102, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: DEA
Model: DEA 0102

Measuring volume: X= 625, Y= 1025, Z= 465 incl.Software Quindos6 Probehead Renishaw PH9 + TP2... Measuring volume: X= 625, Y= 1025, Z= 465 incl.Software Quindos6 Probehead Renishaw PH9 + TP2/TP20 Incl. PC and Printer incl. installation not incl. transport. Overall Dimensions: 1929mm x 1257mm x 2720mm Weight: ca. 3 t The machine is in a very good condition, actually not a "used machine", but completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s). Incl. installation not with transport insurance and packing.

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:2006
Location:Germany, Hessen
Price:-
ID:AS8261

1

12 years ago Details

Unknown, -empty-, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: Unknown
Model: -empty-

IPC Black-Box/WB-05 DCC Controller for RETROFIT of Measuring Machines ADVANTAGES : -for custom... IPC Black-Box/WB-05 DCC Controller for RETROFIT of Measuring Machines ADVANTAGES : -for customer optimized retrofit of a 3D-Coordinate Measuring Machines (CMM), no matter if manual driven or DCC. -Reliability and flexibility by well-tried and world-wide experienced software -Spares the cost for new constructions and facilities (CMM, measuring room, environment and temperature control, a.s.o.) 3D-Coordinate Measuring Machines (CMM) represent a high investment. This is the reason why they should be in use over many years. Mostly the CMM’s are moving on air bearing, this is why they have practically no wear, opposite to the other machine tools. While in most cases the mechanics of a CMM is as good as new, especially if the CMM was serviced normally, the DCC electronics, along with the hard- and software of the evaluation system became over few years obsolete, due to the rapid pace of the technical development in electronics and computer area. We offer with the Black-Box/WB-05 DCC Controller an optimal, economical solution of your measuring problems, shaped on your needs. The retrofit of your existing CMM’s is a cost-effective alternative to buying a new CMM. The efficiency of the measurements is the same as for a new machine

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:2006
Location:Germany, Hessen
Price:-
ID:AS8260

2

12 years ago Details

SHEFFIELD, Apollo RS-50 CNC, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: SHEFFIELD
Model: Apollo RS-50 CNC

Measuring machine Apollo RS-50 DCC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm... Measuring machine Apollo RS-50 DCC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm Design: Mobile, closed portal External dimensions: h= 3600 mm b= 2000 mm t = 2600 mm Weight/KMG: approx. 3 t Length measuring uncertainty: U1 = (6 + 6L/1000) m L in mm Maximum table load: 2,500 kg Compressed air feed circuit: Minimum air pressure 6 bar, oil-free consumption approx. 150 Nl/min Electrical connection: 220 V/50 up to 60 cycles per second Environment temp to Adherence to the accuracy environment temp: 20 C + 1 C Temp. - gradients/hour: 0.7 K/h temp. - gradients: 0.7 K/m computer: PC with printer after newest state of the art Software: Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring controller:WB.05 incl. installation not incl. transport, insurance and packing The machine is brand-new in our work been mounted and tested

View all description View short description

Seller name:
Fa. Alexander Bernath zu Bernathfalva

YOM:1999
Location:Germany, Hessen
Price:-
ID:AS8259

1

12 years ago Details

Fa. Alexander Bernath zu Bernathfalva

{{ title }}