Dealer profile

Mitrovic Industriemaschinen

Location:Germany
Contact person:Dragan Mitrovic
Contact phone:49 (7308) - 811417 0
Contact fax:-
Languages:English, German

About us

Copy link

Send Request

For Sale Listings (10)

WOHLENBERG, Cut Tec 76, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: WOHLENBERG
Model: Cut Tec 76

Wohlenberg Cut Tec 76, High-Speed Guillotine with single and automatic programming and highest grade... Wohlenberg Cut Tec 76, High-Speed Guillotine with single and automatic programming and highest grade of safety(electronic safety light barrier and two-hand guard start). Cutting width 76 cm, Cutting depth 76 cm,Cutting height 12 cm, Clamping pressure min. / max. 200 - 2500 daN, Strokes max.42/min, air-cushion table,HM-knife plus spare HSS-knife Serial-No.3739-01, Year 1999, CE-mark, German UVV prevention inspection certified until Jul 2017

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1999
Location:Germany, Bayern
Price:-
ID:AS12130

12 years ago Details

MAHO, MH 1000 E, TOOL ROOM, MILLERS

Description:

Category: MILLERS
Type: TOOL ROOM
Manufacturer: MAHO
Model: MH 1000 E

X,Y,Z-axis = 1000 x 500 x 450 mm, CNC control Maho-Philips 432 table 1250 x 700 mm, taper ISO SK 50... X,Y,Z-axis = 1000 x 500 x 450 mm, CNC control Maho-Philips 432 table 1250 x 700 mm, taper ISO SK 50, max. speed 3200 rpm, motor power 15 kW, table capacity 850 kg Total weight approx. 7,5 t Very good condition, original splash covering, overhauling in 2012

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1990
Location:Germany, Bayern
Price:14500 EUR
ID:AS12129

12 years ago Details

TOS, NC Grind 400, CYLINDER, GRINDERS

Description:

Category: GRINDERS
Type: CYLINDER
Manufacturer: TOS
Model: NC Grind 400

Grinding dia. 250 mmm, between centres 500 mm, CNC control SINUMERIK 840D with OP17, electronic hand... Grinding dia. 250 mmm, between centres 500 mm, CNC control SINUMERIK 840D with OP17, electronic handwheels for x- and z-axis, parts loader NC-Technik, Switzerland, MOVOMATIC in-process measuring, axial tasting sensor,fully equiped, ready to work. New price in 2004 was 165.000,00 EUR!

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:2004
Location:Germany, Bayern
Price:-
ID:AS12128

12 years ago Details

ZEISS - TSK, Rondcom 75, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: ZEISS - TSK
Model: Rondcom 75

The RONDCOM 75 GB is the roundness and cylindrical geometry measuring machine to measure roundness,... The RONDCOM 75 GB is the roundness and cylindrical geometry measuring machine to measure roundness, eccentricity and the other parameters by the radius measurement method and to measure the other geometric deviations (such as cylindricity and straightness, etc.) of the work piece in combination with the high precision straightness driving function. Measuring diameter 450 mm, workpiece height 700 mm, throat depth 450 mm, loading diameter 900 mm, max. workpiece weight 200 kg, x-travel 700 mm, y-travel 200 mm, z-travel 1.000 mm R-axis, radial adjustment 290 mm clamping table 800 x 600 mm, total weight 7,2 t dimensions of the machine ca. 3,00 x 2,80 x 3,20 m - Rotation accuracy: 0,2 µm - Straightness: 1,5 µm/700 mm (When 700 mm long shaft measuring tool is used) - Static-pressure air bearings on X-, Y-, Z- and B-Axis - Granite used for column and base maintains precision for many years - Incorporates fully automatic 7-axis control function - Provided with TIMMS next-generation integrated program - Full set of accessories and manuals This high-end measuring machine was formerly used by Honda Racing Development Ltd, Bracknell, near London(UK) to prepare und supply engines to Honda GP F1 Racing Team.

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:2006
Location:Germany, Bayern
Price:-
ID:AS12127

12 years ago Details

KEKEISEN, CNC Tornomat 2, OTHER, LATHES

Description:

Category: LATHES
Type: OTHER
Manufacturer: KEKEISEN
Model: CNC Tornomat 2

TORNOMAT machines are polygon turning machines for the generation of flats and profiles on turned pa... TORNOMAT machines are polygon turning machines for the generation of flats and profiles on turned parts, forgings and castings. Slots and grooves can also be produced. Because of the high economy for all series productions, they are the perfect alternative to milling, broaching and slotting. 2 clamping stations allow loading and unloading during machining time either manually or automatically with a loading system. A better cut division and reduced cutting time as well as the compensation of cutting forces can be achieved by simultaneous operation of 2 cutter heads. Simultaneously, additional operations like chamfering, deburring, boring, spot facing etc. can be performed. Range of parts for TORNOMAT 2: 3-36 mm (hexagon A/F) 3-29 mm (square A/F)

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1988
Location:Germany, Bayern
Price:-
ID:AS12126

12 years ago Details

MAHO, MH 1000C, UNIVERSAL, MILLERS

Description:

Category: MILLERS
Type: UNIVERSAL
Manufacturer: MAHO
Model: MH 1000C

XYZ: 1000 x 600 x 700 mm,CNC ControlPhilips Maho 432, table dimensions 1250 x 700 mm, max. load 850... XYZ: 1000 x 600 x 700 mm,CNC ControlPhilips Maho 432, table dimensions 1250 x 700 mm, max. load 850 kg, spindle taper ISO 50, max. speed 3200 rpm, motor power 15 kW, swiveling vertical milling head, horizontal milling spindle, tool magazine 24 pos., total power 32 kVA, machine weight 8,5 t, machine dimensions 4,00 x 4,00 x 2,70 m PS. You can buy an additional universal round table on request!

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1990
Location:Germany, Bayern
Price:19500 EUR
ID:AS12125

12 years ago Details

HURCO, MB1, VERTICAL, MACHINING CENTERS

Description:

Category: MACHINING CENTERS
Type: VERTICAL
Manufacturer: HURCO
Model: MB1

XYZ-travels 762 x 381 x 406 mm, CNC control HURCO, 4th-axis rotary table HURCO 52.70B3, Ø200 mm, cen... XYZ-travels 762 x 381 x 406 mm, CNC control HURCO, 4th-axis rotary table HURCO 52.70B3, Ø200 mm, centre height 160 mm, with tailstock table 1524 x 387 mm, tool magzine 12 pos., spindle ISO SK40, spindle speeds 150 - 3500 rpm, machine weight 3,5 t !!!Machine ist out for operation, z-axis encoder has a failure!!! Otherwise, the machine is in very good condition.

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1985
Location:Germany, Bayern
Price:2500 EUR
ID:AS12124

12 years ago Details

FAG KUGELFISCHER SCHWEINFURT, MGF 10, COORDINATE, MEASURING MACHINES

Description:

Category: MEASURING MACHINES
Type: COORDINATE
Manufacturer: FAG KUGELFISCHER SCHWEINFURT
Model: MGF 10

Multi-coordinate measuring machine FAG MGF10 is designed for the form measurement of large and heavy... Multi-coordinate measuring machine FAG MGF10 is designed for the form measurement of large and heavy workpieces with different axis positions in the XY plane, for example, crankshafts, crankcases, gearbox, gear shafts and cylinder heads. As a reference for determining the deviation of the shape and position are the high-precision guidance axes. Completely on air bearings movable tower construction in the X-and Y-direction is the characteristic feature, such as base and Z column in granite version. The rotary table with R600C ZUN600C for centering and levelling (+ / - 5 mm) of the workpieces up to max. 500 kg load capacity. The deviations of these characteristics can be measured: straightness, roundness, cylindricity, profile of any surface, concentricity / coaxiality, run and inclination. The FAG MS 8001 controller controls all 6 axes (X, Y, Z, Q, Cs, Cr) in manual and automatic operation. The FAG probe controller MV1000 is amplifying the measuring signals of FAG sensor head ST180, the data processing is performed with a HP320 computer. Travels: X-axis longitudinal (air bearing) 600 mm Y-axis cross (air bearing) 400 mm Z axis vertically (air bearing) 1300 mm Cr-axis rotary table (air bearing) 360 ° Cs-axis measuring arm (air bearing) 360 ° Q-axis measuring arm adjustment 250 mm Maximum speed of the linear axes 300 mm/s Concentricity: 0.2 micron + 0.0008 microns/mm measuring height Runout accuracy: 0.08 microns in the center + 0.001 microns/mm radius Machine weight: 8.500 kg Machine dimensions: 4,20 x 2,00 x 3,60 m The form-measuring machine is in excellent condition and still functional. HP320 computer and software are obsolete, service and training are no longer possible. Therefore, the measuring machine is available only for spare parts or for rebuilding!

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:1987
Location:Germany, Bayern
Price:6500 EUR
ID:AS12123

12 years ago Details

STEINHAUER, eCAB PWA, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: STEINHAUER
Model: eCAB PWA

The STEINHAUER eCAB PWA (PWA stands for Personal Wiring Assistant) is a mobile wiring work place, th... The STEINHAUER eCAB PWA (PWA stands for Personal Wiring Assistant) is a mobile wiring work place, that can be placed right next to the switchboard. On site the conductors are being produced in individual length and furnished with sleeves if needed. Essential for the machine concept eCAB PWA is that the next conductor is being produced while the previous one is being inserted into the switch board. Specifications eCAB PWA Control: WAGO 750 Stripper-Crimper: Zoller & Froehlich UNIC LM, electric, for loose Z + F ferrules and plastic collars Wire cross-section: 0.5 mm ² - 2.5 mm ² (AWG 20 - AWG 14) Cable changer for up to 8 cables Machine Dimensions (H x W x L): 1600 mm x 860 mm x 700 mm Machine frame is easy to move on big wheels Weight: 150 kg Power supply: 110 - 230 V / 50/60 Hz Networking: 10/100/1000 Mbps RJ45 Ethernet, optional wireless Operating System: Microsoft ® Windows ® XP Professional Controls: keyboard, trackball, TFT panel Printer (optional) CAB A4 + for Partex PO tubing The PWA is easy to install in electrical plan systems with routing software, like ePLAN Cabinet ®, HOS ELSCHRANK ® and others

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:2011
Location:Germany, Bayern
Price:-
ID:AS12122

12 years ago Details

STEINHAUER, eCAB WorkCenter, Other, Other

Description:

Category: Other
Type: Other
Manufacturer: STEINHAUER
Model: eCAB WorkCenter

CNC-Machining Center for Panel Builders with Steinhauer Layout Software eCAB Sketch (for panel build... CNC-Machining Center for Panel Builders with Steinhauer Layout Software eCAB Sketch (for panel builders), factory price in 2011 was EUR 100.000,00 net Technical Data Machinable workpiece size, front . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,550 x 2,400 mm Enclosure processing hole size (H x W) . . . . . . . . . . . . . . . . . . . . . . . 1,600 x 1,050 mm Machinable enclosure size (H x W x D) . . . . . . . . . . . . . .1,600 x 1,000 mm x 1,600 mm Sheet thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 mm Max. cant-off height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 mm X-,Y-,Z-positioning speed (max. / typical) . . . . . . . . . . . . . . . . . . . 60 m/min. / 45 m/min. Repeat accuracy (all axes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04 mm Tool diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 20 mm CNC High-Frequency Spindle ISO30/DIN69871. . . . . . . 7,5 kW/ 18,000 (24,000) min-1 Max. milling speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,000 mm/min (3 mm steel) Borers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D1-D20 Threads (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M2-M63 Number of tools (Standard) . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CNC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-Axes CNC Beckhoff Machine dimensions (approx./mm) . . . . . . . . . . . . . . . . . . . . .W 3,490, D 2,500, H 2,350 Recommended maintenance area rear: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 mm Recommended maintenance area left or right . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mm Weight of machine (approx.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,800 kg Power connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3L-N/PE 400V 50/60 Hz, 32A fuse Compressed air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8 bar, max. 300 l/min. 1) M16-M63 with circular milling option Accessories: +Chip Extraction Option for automatic removal of milling chippings, approx. 90% chip catch, incl. Kaercher low-noise industrial vacuum +Terminal box holder for batch processing of multiple small enclosures. Single row +Terminal box holder for batch processing of multiple small enclosures. Tripple row +Engraving Option for holohedral engraving with height compensation for bent workpieces, incl. SK30 collet, ER32 metal chuck, engraving toolbit, software +Circular Milling Option for milling of large threads (M16-M63) in thick-walled material, consisting of tool expansion, cirular milling tool w. exchangable milling blade and software extension +Bus-Bar Holder for mounting of multiple copper bus bars up to a length of 2,400 mm and a thickness of 10 mm, 1 set of 2 holders. +Magnetic Hand Brush with quick releaser, for easy removal of ferromagnetic chips

View all description View short description

Seller name:
Mitrovic Industriemaschinen

YOM:2011
Location:Germany, Bayern
Price:-
ID:AS12121

12 years ago Details

Mitrovic Industriemaschinen

{{ title }}