Dealer profile

Gray Machinery Company/Investments, Inc.

Location:United States
Contact person:Glenn Gray
Contact phone:(+1) 847-537-7700
Contact fax:-
Languages:English

About us

Copy link

Send Request

For Sale Listings (24)

TRAUB, TNS 26 DGY, CNC LATHE, LATHES

Description:

Category: LATHES
Type: CNC LATHE
Manufacturer: TRAUB
Model: TNS 26 DGY

TRAUB MODEL TNS-26-DGY CNC TURNING CENTER WITH SUB SPINDLE, LIVE TOOLING & Y-AXIS General Spec... TRAUB MODEL TNS-26-DGY CNC TURNING CENTER WITH SUB SPINDLE, LIVE TOOLING & Y-AXIS General Specifications Main spindle Spindle capacity (max. bar dia.) 26mm (1.02") Turning length per turret 270mm (10.63") Spindle speed max. 8000 RPM AC motor, infinitely variable speed Power rating 11kw (15 HP) Max. torque Nm (ft lb) 105 (50) Constant power rating 1:7 Spindle nose register dia. 90mm (3.543") Counter Spindle: Spindle capacity (Max. bar dia.) 26mm (1.02") Spindle speed max. 8000 RPM AC motor, infinitely variable speed Power rating5.5kw (7.5 HP) Max. torque 35Nm (17'Lb) Constant power rating 1:4 Spindle nose register dia. 85mm (3.346") Turrets Number of turrets 2 Tool bores for cyl. shanks to DIN 69880 12 each Nominal dia. x-length 25x48mm (.984x1.890") Cutting tool shank section to DIN 69880 16x16mm(.630x.630") Average chip-to-chip-time 1.17 Sec. Indexing time 1st position 0.4 Sec. each additional position0.12 Sec. Drive for rotating turret tools Number of driven tools 2 x 12 Power rating (15% duty cycle) 2.6kW (3.5 HP) Max. torque (15% duty cycle) 4Nm (1.9' Lb.) Max. spindle speed 8000 RPM Feed drives X-axes (S1+S2) Rapid traverse and feed rate 12mm (472" Min) Feed thrust 3000N (600 Lb) Feed traverses80mm (3.150") Z-axes (S1+S2) 2 Stock# 10809 2 TRAUB MODEL TNC-30-DGY 8 AXIS CNC MILLING & TURNING CENTER GENERAL SPECIFICATIONS (Con't): Rapid traverse and feed rate 15mm (590" Min.) Feed thrust 5000N (1000") Feed traverses270mm (10.630") Y-axes (TNC 30 DGY) Rapid traverse and feed rate 7.5mm (295" Min.) Feed thrust 5000N (1000 Lbs) Feed traverses330mm (12.992") C-axesOption Machine DimensionsLength x depth2432x1890mm (95.7x74.4")Height 1850mm (72.8")Weight 3540Kg (7800lbs)(with counter spindle and switchgear cabinet)Total installed power rating35kW (47lbs) Motor Specifications Not Available Equipped With (2) Work spindles (main & sub-spindle) (2) Turrets each with (12) driven live tools (2) C-axis positioning (Main & Sub-spindles) Y-axis on upper turret Z-axis positioning of sub-spindle in/out Both turrets can work either or both spindles simultaneously Misc tooling including (4) live tools Automatic tool position compenstion Polygon milling Parts catcher/workpiece separator LNS Mini sprint bar feed, S/N 45167 Traub TX-8F 32-bit CNC controller with color graphics Serial Number 0257 Year 1992 Location PROSPECT HEIGHTS, IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1992
Location:United States, Prospect Heights
Price:-
ID:AS16784

11 years ago Details

TRAUB, TNL 16G, CNC LATHE, LATHES

Description:

Category: LATHES
Type: CNC LATHE
Manufacturer: TRAUB
Model: TNL 16G

5/8"/16MM TRAUB TNL16G CNC SLIDING HEADSTOCK (SWISS TYPE) AUTOMATIC WITH MAGAZINE BAR FEEDER Gener... 5/8"/16MM TRAUB TNL16G CNC SLIDING HEADSTOCK (SWISS TYPE) AUTOMATIC WITH MAGAZINE BAR FEEDER General Specifications The TNL16G series Sliding Headstock Mill/Turning Centre was specially designed for machining of bar stock up to 16mm diameter, with 7 NC - axies, Two work spidles and two 6 station turrets (All turret tooling can be driven), The machine is equipped for precision high speed production requirements. With the included "Y" axis on the opposite spindle with an additional of 3 static tools for end working, all individual turning and milling requirments are covered. The tools of both turrets can be directed towards the main and opposed spindles together. Alternatively, either turret can be used to machine work piees at either the main or opposed spindles therefore offering optimal flexibility. For complete automation the machine is equipped with the high speed LNS Hydrobar Mini Spring 4 metre bar feed and magazine. Parts removal is via a hydraulic parts catcher for Parts up to 140mm long, this transfers the finished work piece to an integral parts conveyor for transporting the work piece out of the machining ara. Or optionally the removal of the parts can be through the opposite spindle for long shaft type components up to 500mm in length. Max. working deg for working with the bar loading magazine 16mm Max. work piece length 500mm Max. turning length (1 stroke) 200mm Spindle head useable (main spindle) 200mm Max. longitudinal travel (opposed spindle) 300mm Max. stroke Y-travel (opposed spindle) 155(+140/-15)mm Speed range driven tools 200-5000 UpM/RPM Number of Axes 7 Main spindle drive (A.C. main drive with:) 2.8/4.4. Kw Opposite spindle drive (A.C. Opposite spindle drive with:) 1.9/3.05 Kw Main & Opposed spindles C Axis Number of turret stations 2 x 6 Static tool stations (3 fixed tool station for end working at the main spindle) Rotating tool drive both turrets Number of driven tool stations 2 x 6 Hydraulic chcking cylinder (hollow, feed finger clamping mechanism) Through tool coolant 5 bar Main & Oppoosed spindle (Both spindles) 16mm capacity Max. speed 7000 RPM Swarf conveyor (discharge height) 650mm Central lubrication system Yes 2 Stock 12 3 SERIAL NUMBER 4 NEW 5 GENERAL SPECIFICATIONS: (CONT.) Main spindle guide bush: Driven guid ebush direct drive Main spindle collet chuck: To accept Collets Opposite spindle colelt chuck: To accept collets Motor Specifications Not Available Equipped With Traub TX8F 32 Bit CNC controls with 14" Color monitor Traub automatic tool position calculation (2) 6 Station turrets with live driven tools Subspindle with Y-axis 3 Fixed tool stations for end working on main spindle C-Axis on Main & Sub spindles Parts catcher Collet chuck on main & sub spindle, F-20 Push type collets LNS mini sprint hydrobar magazine barfeeder Misc tooling including driven tools Chip conveyor Coolant system Serial Number NA Year 1995 Location PROSPECT HEIGTHS, IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1995
Location:United States, Prospect Heights
Price:-
ID:AS16783

11 years ago Details

THERMWOOD, C-42, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: THERMWOOD
Model: C-42

60" X 148" THERMWOOD MODEL 42 3-AXIS CNC DUAL TABLE ROUTER General Specifications Moving table, F... 60" X 148" THERMWOOD MODEL 42 3-AXIS CNC DUAL TABLE ROUTER General Specifications Moving table, Fixed gantry Table size: (2) 60" x 148" Travels: X-Axis60" Y-Axis148" Z-Axis6" Feed rates: X-Axis0 - 1500 IPM Y-Axis0 - 1500 IPM Z-Axis0 - 1500 IPM Power:3 Phase, 60 Cycle, 440 volt or 220 volt Router HP10 1/2 Router speed 3000 - 24000 RPM Router bit shank size Up to 3/4" Dimensions 125"L x 159"W x 85"H Weight (approx.) 16,500 LBS(approx) Motor Specifications Wired 3/60/460V, 32 KVA, 40 Amp Equipped With Thermwood model 91,000 super control version 5.0 software (windows based) High flow vacuum plumbing 10 1/2 HP Variable speed HSD spindle, 3000 - 24000 RPM (2) 60" x 148" Tables 5 Position spindle mounted tool changer Pneumatic auto pop up pins Quincy vacuum pump Vacuum table Automatic tool changer, bar style, 4 position Automatic lubrication system Portable hand held programming unit Serial Number C421490303 Year 2003 Location PROSPECT HTS., IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:2003
Location:United States, Prospect Heights
Price:-
ID:AS16782

11 years ago Details

STAR, SR-16, AUTOMATIC, SCREW MACHINES

Description:

Category: SCREW MACHINES
Type: AUTOMATIC
Manufacturer: STAR
Model: SR-16

5/8" STAR MODEL SR-16 CNC PRECISION SWISS TYPE BAR MACHINE General Specifications CNC control Fan... 5/8" STAR MODEL SR-16 CNC PRECISION SWISS TYPE BAR MACHINE General Specifications CNC control Fanuc 16TTA Max. turning diameter 5/8" Max. headstock strike 8" Max. drilling cap.: Stationary tool 5/16" Power-driven attachment 3/16" Spindle speed 500-10,000 RPM Main spindle motor 2.2 Kw/3.7 Kw Main spindle indexing 15 deg. Power-driven att. spin. speed: Cross mill 350-5000 RPM Slotting 60-900 RPM No. of tools 5-OD Mill/Drill /slot (3-Cross, 3-ID end working & 3-ID Backworking) Tool shank size 12.7mm x 95mm Sub-spindle (back working): Max. chucking dia. 5/8" Max. length for fron ejection 3-5/32" Spindle speed 400-6000 RPM Dimensions (approx) 7'x3.5'x6.5'H Weight (approx) 3600 Lbs Motor Specifications Not Available Equipped With Fanuc 16TT CNC controls 3 Live tool stations Parts Catcher & Parts conveyor Coolant system & Splash guards Iemca mini boss 325/37 magazine bar feed,s/n 97031707 Serial Number G30657 Year 1995 Location PROSPECT HEIGHTS, IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1995
Location:United States, Prospect Heights
Price:-
ID:AS16781

11 years ago Details

SHEFFIELD, PF30, FORM, GRINDERS

Description:

Category: GRINDERS
Type: FORM
Manufacturer: SHEFFIELD
Model: PF30

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1998
Location:United States
Price:-
ID:AS16780

11 years ago Details

SCM, ROUTECH RECORD 220, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: SCM
Model: ROUTECH RECORD 220

5' X 10' SCM ROUTECH RECORD 220 CNC ROUTER WITH VERTICAL & HORIZONTAL HEADS General Specificat... 5' X 10' SCM ROUTECH RECORD 220 CNC ROUTER WITH VERTICAL & HORIZONTAL HEADS General Specifications Head Unit: 10 HP, to 18,000 RPM, ISO30 "Quick Change" router spindle and automatic tool changing system (ATC) with a 10-tool computer controlled tool magazine mounted to the back of the head. Supplied with ten (10) ISO 30 tool holders and ten (10) collets. Powered horizontal electro-spindle with 2 outlets Rotation speed 900-18,000 RPM Power7.5 HP.a 12,000 RPM Right rotation Static inverter for stepless spindle speed and rapid shutdown of rotation Fixing or cylindrical shank tools 3-20 mm Dia. Expandable collet - standard supply 19/20 mm nr 1 Dia. 15/16 mm nr 1 Dia. Attachment for blades with int. dia. 45 mm Max. blade dia. 250 mm Attachment for exhaust hood for saw-blade 100 mm Dia. CNC controlled stepless rotation along "X, Y" plane 0-270 Deg. Manual orientation of horizontal axis -15 Deg. On-Off vertical pneumatic stroke of whole unit 300 mm 90-0- -90 Aggregate head Rotation of the spindle is both clockwise and counter clockwise with CNC Controlled selection as a standard feature. Technical Features: 10 Station circular magazine ISO 30 Quick change toolholders Panted safety locking system Max. center distance between tools - 86.5mm (3.4") Max. tool diameter - 150mm (5-7/8") Max. weight of individual tooling 4.5kg (10 lbs) Max. total weight of tooling contained in the tool charger - 30kg (66 lbs) Technical Features: On/off pneumatic stroke of drilling head 60mm (2-1/4") Work height from spindle nose to table top 320mm (12-1/2") On/off stroke of each spindle 60mm (2-1/4") Cont. on page 2 Stock 1 2 3 SERIAL NUMBER 4 NEW 5 3 GENERAL SPECIFICATIONS: (Cont.) Worktable: The upper worktable is manufactured of aluminum and has 30mm spaced grooves both lengthwise and widthwise to accommodate rubber seals to vacuum clamp work pieces of any shape. The threaded holes (120mm pitch) are in a grid layout of the worktable enabling vacuum clamping, anchoring of equipment, and mechanical clamping systems. Vacuum cups (60mm & 120mm pods) can be inserted in the 120mm pitched, threaded holes for workpiece clamping together with retractable (pop-up) stops for referencing to eliminate the need for spoilboards and templates. Dimensions of Worktable: 3120mm (122.8" left to right) 1200mm (47.25" front to back) Vacuum System: The vacuum hold-down system consists of a high delivery, high head pressure vacuum pump linked to a worktable equipped with CNC controlled double vacuum circuits enabling sommuler machining with two (2) independent vacuum zones per table. *Electronic opening and closing of the vacuum circuits. *Line filters for protection of the vacuum pump. *Push button to actuate each vacuum zone. *Equipped with safety circuit that suspends the machine operation until the operator engages the vacuum system. *Double vacuum meter provided to indicate vacuum pressure for the worktable. *Input and output connections for pneumatic devices are placed along the front edge of the worktable. Max. vectorial speed 85 m/min Max. rapid feed speed (X & Y) 60 m/min -(2,362 in/min) Max. rapid feed speed (Z-Axis) 30m/min-(1,181 in/min) X Stroke 3250mm (128") Y Stroke 1550mm (61") Z Stroke 300mm (11.8") Cont. on Page 3 Stock 1 2 3 SERIAL NUMBER 4 NEW 5 3 GENERAL SPECIFICATIONS:(Cont.) Control Unit: NUM Model 1040 (PC Based), Multi-axis CNC control. THe NUM 1040 represents a state of the art fourth generation CNC control unit, supplied with an extra large memory capacity enabling a large number of programs to be resident in the control unit at all times. The NUM 1040 is extremely easy to learn and use as the unit seeks out programming and assists the operator in correcting the program, along with a color graphic video terminal which allows a visual check of the work piece program as well as the cutting tool path. Technical features: *1.2G Disc Drive *Profile geometry programming *16 megs of RAM memory *10.5" color graphic video monitor *Parametric programming Motor Specifications Not Available Equipped With Programmable angular offset Acceleration control 139 Available variables Programming from keyboard Windows operating system Helical interpolation Programmable scale factor Programmable mirroe image Tool compensation The control is mounted in a seperate control cabinet supplied with a filter air cooling/circulation system. NOTE: REPLACEMENT PRICE $166,000.00 Serial Number AA1-11143 Year 1999 Location ON LOCATION

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1999
Location:United States, Prospect Heights
Price:-
ID:AS16779

11 years ago Details

MORI SEIKI, ZL-25, CNC LATHE, LATHES

Description:

Category: LATHES
Type: CNC LATHE
Manufacturer: MORI SEIKI
Model: ZL-25

Stock Number: 10834 --- MORI SEIKI ZL-25A/500 4-AXIS CNC TURNING CENTER, 10.2"MAX. TURN, 21.7" MAX.... Stock Number: 10834 --- MORI SEIKI ZL-25A/500 4-AXIS CNC TURNING CENTER, 10.2"MAX. TURN, 21.7" MAX. LENGTH, 4-AXIS, 2 TURRETS, 4200 RPM, 2.4" BORE, MORI/FANUC MSD516, FANUC 16T CNC, 6064 HOURS, NEW 1995 --- PHOTO AVAILABLE

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1995
Location:United States, Prospect Heights
Price:-
ID:AS16778

11 years ago Details

MOLLART, A175, GUN, DRILLS

Description:

Category: DRILLS
Type: GUN
Manufacturer: MOLLART
Model: A175

(2) 5/8" X 27" MOLLART MODEL A175 CNC TWIN SPINDLE GUN DRILLS SERIAL NUMBER 173-0492 & 175... (2) 5/8" X 27" MOLLART MODEL A175 CNC TWIN SPINDLE GUN DRILLS SERIAL NUMBER 173-0492 & 175-0492 NEW 1992 GENERAL SPECIFICATIONS: Powermate Control GE Fanuc Range .08 -.750 Hole depth 27" Max. parts length 40" AC spindle motor 6.5 HP Spindle Nose bore, Collet type 25mm Spindle center height from table 200mm Drill feed range 0-1000mm/min Rapid traverse 10mm/min High pressure coolant system Micron filtration 20 Spindle Max. 12,000 RPM EQUIPPED WITH: (2) Counter rotating work holding tailstock spindles w/6 Jaw chucks, 32mm Bore, 100 RPM, Max. diameter 70mm Totally Enclosed Guarding RS 232 Port Spindle load meter High Pressure Coolant pump Coolant filtration Watch Video: http://www.youtube.com/watch?v=uZJ4j7H6VoE

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1992
Location:United States, Prospect Heights
Price:-
ID:AS16777

11 years ago Details

LORENZ, LFS 282, GEAR, SHAPERS

Description:

Category: SHAPERS
Type: GEAR
Manufacturer: LORENZ
Model: LFS 282

General Specifications Table diameter 320mm Table bore diameter/depth 150/350mm Max. table speed... General Specifications Table diameter 320mm Table bore diameter/depth 150/350mm Max. table speed 30 rev/min Max. toothing diameter 280mm Max. diameter internal gearing 280mm Max. diameter inner teeth 250mm Outer diameter wheelbase cutter spindle to work table 280mm Radial velocity infinitely programmable 0-3,750mm/min Total weight (basic machine) 13000 Kg Ambient temperature 15-38deg C Machine stand: Axial travel 250mm Cutting spindle head carriage: Traversing-stroke position 250mm Max. traversing 1800mm/min Max. swivel angle 12 deg. Drive power 22kW Max. Module saping 6mm Spindle shaft diameter 90 Max. stroke 100 Stroke 80-1200 cycles/min Max. tool diamter 240mm Max. spindle speed 30 rev/min Axis angle adjustment head butt/vertical _/-0.5deg Spindle: Min. Stroke 0 mm Max. Stroke 100mm Max.Verzahnbreite (straight teeth,standard cams) 87mm Adjustment max. 600 mm/min Equipped With Small hydraulic unit Hydrostatics, lubrication Coolant System Indramat Drives AC Control: Liebherr CNC LH90 V4 based on a PC-NC, Integrated soft PLC control & Decentralized PLC peripheral via Probivus DP, Brand WAGO. PLC SIEMENS STEP 5 programming language Built-in floppy disk drive INDRAMAT drives w/SERCOS interface to the CNC. EQUIPPED WITH: Screen: 10" Color TFT display Prompt: Prompt type 2 and dialog progamming with the use of WINDOWS - Metric system of measurement swithcable/inch Remote diagnostics Liebherr control LH90-V4 Recording and graphic display of internal control, machine and driving conditions Error logging and error analysis and oscilloscope, Review and possible modification of NC program, Review and possible modifications of the PLC program PLC configuration (activate the option) Software update, Communication with the operator, Remote diagnostics of charge during the warranty. Operating & Control voltage: Operation voltage 415 V +/-10%, 50Hz +/-2% Net form: TN system in accordance with DIN VDE 0100, T300 control voltage 24 V DC. Straight guide: Straight guide in standard accuracy w/hydrostatic bearing for Mfg of spur gears. Automatic adjustment of the retraction: Adjustment for two-web automatically switching to one of the two cam tracks. Used forswitching to the retraction Internal or External teeth. Electronic handwheel: For NC Axes Signal exchange: Signal exchange for external automation by description "Standard - Exchange of signals for external automation: Electrical interface: Parallel E/A-Interface, PLC outputs with optocoupler (isolated), voltage signal 24VDC, wired to a 24-pole multi-socket mounting on the transfer point for automation. U.S. Service socket: Instalation of a U.S. Service outlet (110V) under the control panel (outside) Hydraulic control unit: Hydraulic conrol unit for clamping device, cosisting of valves and pressure switch brand Rexroth. Adjusting without lock. fFor this purpose, hydraulic pressure supply required. Coolant cleaning with wire filter: Filter System without filter cartridges to clean the coolant apparatus for flushing. Edge filter with gap width 50 microns. Motorized between filter cleaning. Manual disposal of the filter cake. Extended filter intervals than conventional filter cartridges. Chip Conveyor: Chip conveyor with magnetic roller, drop height 650mm Spray Gun: To rinse with wet machining chips Platen Force 12 kN: Increase of the counter-holder force to max. 12 kN one adjustable. EQUIPPED WITH: (Cont.) Backrest GS 05.1 H-450: Backrest with hydraulically moveable backrest slide. Manually adjustable backrest force, max. 8 kN suitable for thrusting of internal gears. Hydraulic tensioner: Clamping cylinders in the machine table. Manually adjustable clamping pressure for clamping force to 80 kN. Second pressure level to release the device at Quick-change device. Ring Loader Automation: Ring loader RL02 with 2 retractable workpiece pockets; suitable for workpieces max workpiece wieght per bag; to 180/280mm diameter. 35kg Backrest GS05 H-450 required. Parallel Gripper for RL02: 2 Parallel gripper suitable manualy adjustable to 180/280mm workpiece diameter. For Gearing 11,12,13,14,15,16: Chuck Chuck for expanding holde tension and centering on Collet including workpiece support. For this purpose, basic device or base flange requried with drawbar. Data from table interchangeable parts. Adapter flange: Adapter flange with drawbar for hydraulically actuated chuck fo rthis purpose, hydraulic tensioning device required. Positioning: Means for driving or for positioning of the cutting wheel. Tool mounting device: Tool fixture with SK-recording for the external clamping of the tool on the tool holder. Suitable for multiple machines SK same recording. Standard program "Shaping": Two flank Full circle shaping at a stroke position for exterior or interior gearings in pushing or pulling method. Additional program "Multi-Edit": For up to 5 operations in a single setup. The sequence of operations is input by the user graphically supported. The standard program shaping or additional programs item poking, axials and radial turnig and chamfering can be integrated. Measurement system: Can be switched between metric and inches. Serial Number FN7016 Year 1999 Location ON LOCATION

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1999
Location:United States, Prospect Heights
Price:-
ID:AS16776

11 years ago Details

KOMO, VR-805Q, OTHER, MILLERS

Description:

Category: MILLERS
Type: OTHER
Manufacturer: KOMO
Model: VR-805Q

5' X 8' KOMO VR805Q 3-AXIS CNC ROUTER General Specifications Table: Table travel (Cross) Y-Axis... 5' X 8' KOMO VR805Q 3-AXIS CNC ROUTER General Specifications Table: Table travel (Cross) Y-Axis 71-1/2" Table dimensions (W X L) 60" x 96" Type of work mounting plate on each table Working envelope 96"x60"x8" Perske 12.5 HP 4 Programmable Spindle speeds through 18,000 RPM Piggyback high speed drills 2 Spindle Carriers: Transverse Travel (X-Axis) 162" Spindle head travel on cross rail (X-Axis) Longitudinal travel 244" to Center of spindle (Adjustable) 10"thru 24" Routers 4 Variable through 18,000 RPM Collet type quick change 1/8" thru 1" Vertical travel (Z-Axis) 8" Z Position slide 6" High speed drills (piggyback) 4 RPM 18,000 Capacity 3/8" Drill chuck assemblies 1/2" Vertical travel (Z-axis) 8" Feed range tranverse: X & Y-Axis 1000 IPM Z-Axis 600 IPM Machine dimensions 129"Dx292"wx111"H 2 Stock# 10821 2 2 3 SERIAL NUMBER 4 NEW 5 Motor Specifications Not Available Equipped With Start/Stop Buttons with Keys Safety guards (4) Horsepower (Routers) (2) Horsepower (High speed drills) .035 GE Fanuc OMC CNC microprocessor Emergency stop buttons Fanuc OMC: Linear & Circular interpolation Cutting Radius compensation Toll length offset Work coordinate offset system Absolute & Incremental programming Feed rate & Rapid traverse override Background editing RS232 Port Manual pulse generator Canned cycle 10 HP Vacuum PumpWATCH VIDEO: http://www.youtube.com/watch?v=rWZkJBk4EMw Serial Number 1065392 Year 1992 Location PROSPECT HEIGHTS, IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1992
Location:United States, Prospect Heights
Price:-
ID:AS16775

11 years ago Details

KITAMURA, MYCENTER 4, VERTICAL, MACHINING CENTERS

Description:

Category: MACHINING CENTERS
Type: VERTICAL
Manufacturer: KITAMURA
Model: MYCENTER 4

KITAMURA MYCENTER 4 3-AXIS CNC VERTICAL MACHINING CENTER SERIAL NUMBER 30574 NEW 1994

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1994
Location:United States, Prospect Heights
Price:-
ID:AS16774

11 years ago Details

HOFLER, H1000, GEAR, GRINDERS

Description:

Category: GRINDERS
Type: GEAR
Manufacturer: HOFLER
Model: H1000

HOFLER MODEL H-1000 PRECISION GEAR GRINDER General Specifications Max gear diameter 1000mm Min r... HOFLER MODEL H-1000 PRECISION GEAR GRINDER General Specifications Max gear diameter 1000mm Min root diameter 35mm Max module 14 Min module 1.5 Max grinding stroke 290mm Max face with B=0 deg. 225mm Min/max number teeth ground 12/372 Prime number up to 150 Max helix angle 45 deg. Max table load 1500 Kgs. Work table diameter 750mm Generating speed infinitely variable 90-900mm/min Dimensions (approx.) 4400x3600x3200mm Weight (approx.) 11800 Kg. MACHINE REWORKED BY WEKO IN 1999 TO OBTAIN DIN 4 STANDARDS RESULTS OF GROUND GEARS CAN BE SUPPLIED Motor Specifications Not Available Equipped With Crowning, optical helix setting Change gears Paper filtration coolant system Automatic wheel dressing Tailstock Fully guarded Serial Number 393 Year 1987 Location ON LOCATION

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1987
Location:United States, Prospect Heights
Price:-
ID:AS16773

11 years ago Details

HITACHI SEIKI, HG-400III, HORIZONTAL, MACHINING CENTERS

Description:

Category: MACHINING CENTERS
Type: HORIZONTAL
Manufacturer: HITACHI SEIKI
Model: HG-400III

HITACHI SEIKI HG400 III CNC HORIZONTAL MACHINING CENTER General Specifications X-Axis travel 22"... HITACHI SEIKI HG400 III CNC HORIZONTAL MACHINING CENTER General Specifications X-Axis travel 22" Y-Axis travel 23" Z-Axis travel 20" Table center to spindle nose 25" Pallet Dimensions 15.75" x 15.75" Pallet Loading capacity 880 Lbs. Minimum Indexing angle 360 deg. Spindle motor 25/20 HP Spindle speeds 60-12,000 RPM Spindle taper #40 Rapid traverse 1417 IPM Cutting feed rate 0.1 to 1417 IPM Tool storage capacity 30 Tool selection Random Bi- Directional Pallet Change system Rotary Electric power supply 35 Kva Machine weight (approx) 17,200 Lbs. Motor Specifications Not Available Equipped With Seicos 16M CNC controls (2) 15.75" x 15.75" Pallets 30 Position Automatic tool changer 60-12,000 RPM Spindle Coolant thur Spindle Coolan tank Hydraulic Unit Transformer NOTE: MACHINE ONLY RAN ALLUMINUM PARTS Serial Number 43592 Year 2000 Location PROSPECT HEIGHTS, IL

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:2000
Location:United States, Prospect Heights
Price:-
ID:AS16772

11 years ago Details

HARDINGE, CONQUEST T42, CNC LATHE, LATHES

Description:

Category: LATHES
Type: CNC LATHE
Manufacturer: HARDINGE
Model: CONQUEST T42

HARDINGE CONQUEST T42 2-AXIS BIG BORE CNC SLANT LATHE WITH SUB SPINDL EAND BAR FEED SERIAL NUM... HARDINGE CONQUEST T42 2-AXIS BIG BORE CNC SLANT LATHE WITH SUB SPINDL EAND BAR FEED SERIAL NUMBER SG-733 NEW 1995 Page 1 of 2 GENERAL SPECIFICATIONS: Spindle: Spindle configuration (ANSI) A2-6", 20C Round collet (through capacity) 2.0" Hole thur spindle 2-378 Sub-Spindle ANSI A2-5" Hole though spindle 1.890" Round 16c Collet (through capacity) 1.625" AC Drive System 5 HP Torque rating @1,500 RPM base speed 17.5 ft-lb Speed range (1-RPM steps) 80-6000 RPM AC Digital Drive System: Standard 15 HP Torque rating 51.5 ft-lb Speed range (1-RPM steps) 40 - 4400 RPM Carriage and Cross Slide: Swing diameter over upper way cover 21.2" Preloaded ball screw diameter 1.259" X-axis travel (max) 5.31" X-axis rapid traverse rate 472 IPM Z-axis rapid traverse rate 630 IPM Z-axis travel 13.9" Vertical Thrust: No. of positions 12 Max. square shank tool size 3/4" Max. round shank tool size 1-1/4" Max. distance from spindle face to turret face 14" Turret indexing time (next station) .77 seconds Turret indexing time (furthest station) 1.24 seconds Turret indexing accuracy +/-1 arc sec. Max. turning diameter with std. qualified 3/4" square shank tool (1" head) 9.5" Electrics 220V,3 PH,60 CYC Weight (approx.) 10,000 Lbs Page 2 of 2 EQUIPPED WITH: GE Fanuc 18TB control 20C Collet spindle, 2.0" Sub Spindle Iemca Boss 542 Automatic bar feeder Parts catcher Chip conveyor Barfeed interface Approx. Dimensions: Machine - 102" x 82" x 80" Bar feed - 270" x 45" x 76" Chip conveyor - 93" x 26" x 59" High Pressure: Coolant unit - 34" x 32" x 90" Pallet parts - 48" x 48" x 29"

View all description View short description

Seller name:
Gray Machinery Company/Investments, Inc.

YOM:1995
Location:United States, North Carolina
Price:-
ID:AS16771

11 years ago Details

Page 1 of 2

Gray Machinery Company/Investments, Inc.

{{ title }}